The practical projector tray can be used universally for projectors, monitors and for other equipment. The tray's dimensions are 420 x 380 mm. The flange adapter dimension is ø 36 mm and the clamp nut connects to the loud speaker stands or other stands with a corresponding tube diameter. 

The PreSonus AVB-D16 is the first plug-and-play endpoint that bridges AVB and Dante™ networks. Now you can send and receive up to 16 audio channels between an AVB and Dante network with one simple device, making it the perfect solution to connect your StudioLive Series III AVB ecosystem to your favorite Dante-equipped products like the PreSonus CDL-12 constant directivity loudspeaker. Built-in Asynchronous Sample Rate Conversion ensures that the AVB-D16 provides precision clock isolation between your AVB and Dante networks for pristine, clear audio with no dropouts or artifacts.

Onboard AVB-networking and the AVB-D16 make it possible to add Dante functionality to your StudioLive Series III mixer without the unnecessary hassle of an internal option card. Simply connect one or more AVB-D16 AVB-to-Dante bridges to your existing StudioLive Series III AVB network to add 16 channels of Dante I/O with each bridge. AVB-D16 makes the vision of plug-and-play functionality between audio networks a reality!

Whether you’re looking at your Dante network setup from Audinate’s Dante Control software or managing your StudioLive Series III AVB ecosystem from UC Surface or a StudioLive Series III console touchscreen, the AVB-D16 presents itself as a simple 16x16 network device. This lets you easily patch up to 16 audio sources on your StudioLive Series III mixers or NSB-series stage boxes to any available input on your Dante network and receive 16 channels of audio from your Dante network to route to your StudioLive Series III mixers, EarMix 16M personal monitor mixers, or the outputs on your NSB-series stage boxes, creating a truly cohesive networking experience between the two protocols.

With built-in Asynchronous Sample Rate Conversion, the AVB-D16 provides precision clock isolation between the AVB and Dante networks. This ensures pristine, clear audio with no dropouts or artifacts. It also allows you to run different sample rates on the AVB and Dante networks. So even if you're operating a Dante network at 96kHz, you can still connect streams between your StudioLive Series III AVB network operating at 48kHz with total confidence that the audio will be clean and error free.

With the all-new Line 6 Relay G10II, you get the kind of wireless guitar system you’ve always wanted - affordable, compact and easy to use (Plug n' Play with no extra setup required)! 

Furthermore, the Relay G10II features 24-bit digital sound quality, just like the top pros use on stage and in the studio.

Simply Plug And Play!

The built-in rechargeable battery provides up to 8 hours of playing time – that’s longer than most pro musicians will ever need for a single concert! In other words: you should do just fine.

Sleep mode extends battery life to as much as 200 hours, and, when it’s time to recharge, simply plug the transmitter to the receiver.

The Stage 1 Board from IsoAcoustics provides a portable isolation platform when combined with Stage 1 Isolators (available separately). The Stage 1 isolation board decouples guitar/bass amps, stage monitors and subwoofers from the stage while still maintaining sound clarity and the bass punch in a performance. This portable solution will provide consistency in studio, at home and from one stage to the next.

The SLX1 bodypack transmitter is designed to hold up to the most adverse conditions. It can be used with headworn, lavalier, instrument microphones, or with guitars or basses.

Shure’s P9RA+ is a compact, stereo bodypack receiver for use with the PSM®900 Wireless Personal Monitor System. With a hybrid analog/digital architecture, the P9RA+ Bodypack Receiver offers unparalleled audio quality with more headroom, better stereo separation, and higher fidelity, along with reliable RF performance for increased RF signal strength to meet the needs of professional audio applications of all kinds, including IEM and IFB applications. All P9RA+ receivers are compatible with P9T and P10T transmitters and all Shure SE Sound Isolating™ Earphones.

The DN100 has become an established favourite amongst both engineers and musicians alike. With its high headroom, dynamic response and sonic clarity, DN100 faithfully reproduces the character of electric and acoustic instruments and allows far more of the detail of musical performances to be captured. DN100 is intended for professional applications where +48 V phantom power is a standard feature on all mixing consoles, and its innovative design results in a significantly higher clipping point than many other active DI Boxes, providing +10 dBu output into a 2 kΩ load. This increased headroom means that much higher level input signals can be accommodated without the need for an attenuating pad. Combined with a very low noise input circuit topology, DN100 offers a very wide dynamic range, and only requires a single -30 dB pad for use when connecting directly to instrument amplifier outputs.

DN100 is built to handle the rigours of life on the road, a thick aluminium extrusion protects the electronics, and in turn is covered by a tough silicone rubber sleeve.

Windjammer reduces unwanted wind noise when used with an MV88 or MV88+ Microphone.

Practical tray that can be attached to all stands with a tube diameter of 25 to 42 mm. The usable tray area is 250 x 330 mm and is ideal for smaller electronic devices such as mixers, controllers or tablets. An additional recess in the plate ensures convenient cable routing. Another useful feature is the can/cup holder. The robust steel construction is ideal for percussion and other music accessories. A foam insert dampens vibrations and prevents unpleasant background noises. The distance to the stand as well as the alignment of the plate can also be individually adjusted.

This foldable and space-saving laptop stand is a must-have for every mobile DJ and musician. Due to its functionality and versatility, it can be assembled and disassembled very easily. The robust steel tube construction in combination with the attractive aluminium foot and support plate ensures excellent stability despite its low weight. Individually adjustable stop pins with rubber caps allow the use of all common laptop models, mixers, CD players, etc. The horizontal height is 320 mm and can be inclined in 3 steps. Non-slip rubber pads are included in the delivery.

Your StudioLive 24 Series III Mixer deserves to stay shiny and new all the time. Treat it well with this stylish nylon dust cover.

Shure’s P9RA+ is a compact, stereo bodypack receiver for use with the PSM®900 Wireless Personal Monitor System. With a hybrid analog/digital architecture, the P9RA+ Bodypack Receiver offers unparalleled audio quality with more headroom, better stereo separation, and higher fidelity, along with reliable RF performance for increased RF signal strength to meet the needs of professional audio applications of all sizes, including IEM and IFB applications.

2.5mm TRS male to 5-pin DIN MIDI female adapter for:

• iRig Keys 2
• iRig Keys 2 Pro
• iRig Pro
• iRig Pro Duo
• iRig Pro Duo I/O
• iRig Pro I/O
• UNO Drum
• UNO Synth

Also suitable for other MIDI interfaces using 2.5mm TRS to 5-pin DIN MIDI cables.

10cm / 3.9"

Snúra í Presonus HP2 in-ear beltback

Cover for Db Sub18D