Fara í efni

Karfan þín

Karfan er tóm.

Standar og Pedalar

Síur

Framleiðendur
Vinsælt
Tónlistarnám
Tilboð (pakkatilboð)
Vaxtalaust lán
Gott fyrir byrjendur
Á lager
Nýtt

Pearl Timpani Drum Throne

The Pearl D-3000TC is a professional grade timpani throne that accommodates a wide range of player heights and comfort positions; providing a new standard of stability and adjustability for the modern percussionist.
Samtals m/vsk
85.990 kr.
Á lager
Nýtt

Tama MC8 & ZCB Clamp

Hoop Grip (MC8) & Z-Rod for Cowbell (ZCB) bundlepackage
Samtals m/vsk
7.990 kr.
Á lager
Nýtt

Tama HT430ORF Drum Throne

LINEUP Color: Orange Model No.: HT430ORFSpecifications:- Round Rider "Fabric Top" Seat- Seat Link- Rocklok- Foot Life- Weight: 5.3kg (11.1lbs)- Height Adjustment Range: 485mm - 655mm (19" - 25 3/4") Color: Sage Model No.: HT430SGFSpecifications:- Round Rider "Fabric Top" Seat- Seat Link- Rocklok- Foot Life- Weight: 5.3kg (11.1lbs)- Height Adjustment Range: 485mm - 655mm (19" - 25 3/4") Color: Navy Blue Model No.: HT430NBFSpecifications:- Round Rider "Fabric Top" Seat- Seat Link- Rocklok- Foot Life- Weight: 5.3kg (11.1lbs)- Height Adjustment Range: 485mm - 655mm (19" - 25 3/4") FEATURES 1st Chair Height Adjustment 1st Chair thrones offer the best of both worlds-the exact height adjustment of threaded rod thrones with the fast adjustment of T-bolted systems:1. Loosen the bolt (A) and raise the threaded rod to the approximate desired height (it's not necessary to get the exact height at this point).2. Screw the Height lock (B) down to the top of the nylon bushing.3. If a minor adjustment is necessary, simply turn the Height lock or rotate the seat.4. Tighten the bolt (A) firmly. Rocklok TAMA's "Rocklok" features a specially designed Nylon Bushing at the bottom of the throne's threaded rod that prevents side-to-side motion within the base.This special feature provides exceptional durability and stability. Seat Link The "Seat Link" casting securely grips the entire circumference of
Samtals m/vsk
33.990 kr.
Á lager
Nýtt

Pearl Elimin Red Line chain dr foldable

Pearl P2050C/F Eliminator Redline LT Single Bass Drum Pedal
Samtals m/vsk
39.990 kr.
Á lager
Nýtt

Pearl MDT Bass Drum Lift

Samtals m/vsk
4.790 kr.
Á lager

Vater BD Beater Red Wood

VATER VBRW Wood Bass Drum Beater (Red) Features a hardened steel shaft, Perm-lock safety nut, and a ball that`s balanced for speed.
Samtals m/vsk
4.990 kr.
Á lager

Pearl Bongo Stand all fit

With the PB900LW bongos rest on the outer sockets. The sockets are adjustable to align with the outer tuning lugs on the bongos. This function allows the player to instantly move the bongos from mounted to "between the knees" playing and back again. The top post rotates to change the angle of your bongos. A strap is included to add extra security when bongos are placed at extreme angles.
Samtals m/vsk
20.990 kr.
Á lager

Pearl Hoop Clamp cymbal holder

Pearl's Bass Drum Hoop Mount Cymbal Holder lets you mount a cymbal to your bass drum without additional brackets or shell modification. Its finish-saving hoop clamp attaches your cymbal of choice directly to the bass drum at any point of the front or batter side hoop. The included arm is height and angle adjustable and features a Uni-Lock gearless tilter, insuring your cymbal is securely in the perfect position. Excellent for classic looks and increased cymbal function without adding to your hardware load. Classic looks and function without drilling into your bass drum. Expand your cymbal set-up without added stands.
Samtals m/vsk
9.990 kr.
Á lager

Pearl ADP-30 Adaptor

Pearl's ADP30 Three Way Adapter Clamp is the center of our reliable and fully adjustable double tom stand system. Featuring three independent Quick Release clamps, it allows for complete height and angle positioning of tom holders, cymbal booms, and accessory arms when clamped to an existing stand. Its trilateral design can either maximise or reduce the reach needed to make everything fit in its place, and each included Ultra Grip wingnut comfortably secures the clamps in their needed place.
Samtals m/vsk
9.990 kr.
Á lager

Yamaha HS1200T Hi Hat Stand

Yamaha HS-1200T Hi-Hat Stand - Two Leg, Toggle Drive
Samtals m/vsk
47.990 kr.
Á lager

Yamaha DRUM STOOL DS-950

Heavy weight, bench-style seat, double-braced wide stance legs, screw height adjustment
Samtals m/vsk
39.990 kr.
Á lager

Pearl AX-28 Adaptor

MODEL NUMBER AX-28 The AX28 Two-Way Multi-Angle Adapter features a fixed quick-release clamp (fits 5/8" to 1-1/8") and revolving clamp (fits 1/2" to 1-1/8").  Each expandable Quick Release clamp offers reliable mounting and positioning in your set-up.  The locking, ratcheted tilter adjusts forward and aft for flexible mounting of accessories and added drums around the drum kit. EXPANSION CLAMPS Quick-Release  WING NUTS Ultra-Grip w/Comfort Contours TILTER ADJUSTABILITY Geared and Locking w/Single Axis Adjustment CLAMP CAPACITY Fixed Quick-Release Clamp: 5/8" to 1-1/8" Revolving Clamp: 1/2" to 1-1/8" 
Samtals m/vsk
7.590 kr.
Á lager

Pearl reverceble cymbal cup

Cymbal rubber Pearl RC-20, Cymbal seat, protection for keyhole Cymbals
Samtals m/vsk
590 kr.
Á lager

Pearl HH boom w/ Clamp

For added hi-hat voices all around the drum kit, the Uni-Lock Closed Hi-Hat Holder puts a pair of closed hi-hat cymbals in easy reach practically anywhere in your set-up. It features a multi-angle quickset clamp that attaches to any stand with ease. Its durable boom arm and gearless Uni-Lock tilter deliver flexible reach and positioning, and adjusting the desired open/shut amount of the cymbals is as simple as a turn of the spring-loaded top washer. Great for hi-hat, splash, or other cymbal combinations for accents, time-keeping, and even creative stacking. Quick, solid, hassle-free hi-hat mounting practically anywhere around the kit.
Samtals m/vsk
11.990 kr.
Á lager

Pearl cymbal holder Curved

Utilizing the infinite angle adjustability of Pearl's GyroLock tilter, the CH1030C Cymbal Boom arm features the unique positioning reach of Pearl's Boomerang arched mounting arm. This exclusive 12.5mm curved arm creates totally unique set-up function and inspiring visuals. Its 12mm knurled shaft interacts with other Pearl Boomerang accessories that make previously unattainable cymbal configurations possible. The WingLoc quick-release cymbal nut delivers fast, easy cymbal changes, and its 7/8" base docks into most mounting clamps and auxiliary ports. The world's only curved cymbal boom stand. Create cymbal set-ups with a whole new twist!
Samtals m/vsk
17.990 kr.
Á lager

Pearl Cymbal Curved Boom st

Utilizing the infinite angle adjustability of Pearl's GyroLock tilter, the B1030C Cymbal Boom Stand features the unique positioning reach of Pearl's Boomerang arched mounting arm. This exclusive 12.5mm curved arm creates totally unique set-up function and inspiring visuals. Its 12mm knurled shaft interacts with other Pearl Boomerang accessories that make previously unattainable cymbal configurations possible. The B1030C features die-cast pipe joints with nylon bushings to prevent unwanted vibration noise along the shaft. The entire system is supported by parallel double-braced legs, for a solid, secure base via the stand's vibration-absorbing rubber feet. Truly, a superior platform for your most coveted brass. The world's only curved cymbal boom stand. Make an inspired visual and sonic statement!
Samtals m/vsk
27.990 kr.
Á lager

Pearl AX-25 Adaptor

The AX25 features two quick-release revolving clamps for multi-angle convenience and positioning. Adjust from side-to-side and up-and-down for flexible mounting of accessories and added drums around the drum kit. Each clamps expands to fit 1/2" to 1-1/8" rods and pipes.
Samtals m/vsk
7.590 kr.
Á lager

Tama Speed Cobra Double Black

  Accu-Strike Cobra Beater The Cobra Beater was developed to bring out maximum potential of a bass drum. Butadiene Rubber has unique characteristics. It offers strong resistance to wear, lighter weight and providing consistent and articulate sound with strong attack. And because of the thicker rubber part, the sound is fat yet focused even at lower volumes. Swivel Spring Tight The conventional approach to the spring assembly has been to anchor the bottom of the spring while the top of the spring is being pulled from various angles throughout the pedal's cycle. But a spring being pulled on at an angle represents wasted energy and causes turbulence. The Swivel Spring Tight assembly solves this problem, recapturing that lost energy and optimizing smoothness through the use of a contoured assembly that allows the base to swivel freely with the spring. This enables a straight spring pull during the pedal's entire cycle, resulting in the smoothest, lightest action ever found on a bass drum pedal. Para-Clamp II Pro TAMA now introduces Para-Clamp II -an even more clever and useful version of the popular original. The Para-Clamp II is capable of gripping the widest variety of bass drum hoops ever. The improvement is largely due to its newly designed three-dimensional rubber grip. Holding power is increased and the possibility of scratching the hoop is eliminated. Furthermore, set-up and breakdown are easily facilitated, while sitting on a throne because the T-bolt of the Para-Clamp II Pro is on the side of the footboard, rather than under it. Oiles® Bearing Hinge To reinforce durability, the Iron Cobra 900 Series features a thicker 6 mm diameter shaft. Oiles® bearings create far less friction than standard ball bearings. They also eliminate unwanted side-to-side motion while providing superior durability. (Oiles® bearings is a registered trademark of the Oiles Co., Ltd.). Speedo-Ring TAMA eliminated another source of friction by replacing the traditional nylon rocker cam with the Speedo-Ring, a rocker cam with a high quality built-in ball bearing rocker. The Quick-Hook not only allows for easy setup and tear-down but also streamlines the pedal, allowing quick stowaway in the hard case without removing the beater. Drum Hammer Rolling Glide LiteSprocket Weighing in at 40% less than our previous Iron Cobra cam, the round, Rolling Glide "LiteSprocket" revolves naturally and smoothly, contributing to a lighter more responsive feel.  
Samtals m/vsk
99.990 kr.
Á lager

Tama single Speed Cobra Black

  Accu-Strike Cobra Beater The Cobra Beater was developed to bring out maximum potential of a bass drum. Butadiene Rubber has unique characteristics. It offers strong resistance to wear, lighter weight and providing consistent and articulate sound with strong attack. And because of the thicker rubber part, the sound is fat yet focused even at lower volumes. Swivel Spring Tight The conventional approach to the spring assembly has been to anchor the bottom of the spring while the top of the spring is being pulled from various angles throughout the pedal's cycle. But a spring being pulled on at an angle represents wasted energy and causes turbulence. The Swivel Spring Tight assembly solves this problem, recapturing that lost energy and optimizing smoothness through the use of a contoured assembly that allows the base to swivel freely with the spring. This enables a straight spring pull during the pedal's entire cycle, resulting in the smoothest, lightest action ever found on a bass drum pedal. Para-Clamp II Pro TAMA now introduces Para-Clamp II -an even more clever and useful version of the popular original. The Para-Clamp II is capable of gripping the widest variety of bass drum hoops ever. The improvement is largely due to its newly designed three-dimensional rubber grip. Holding power is increased and the possibility of scratching the hoop is eliminated. Furthermore, set-up and breakdown are easily facilitated, while sitting on a throne because the T-bolt of the Para-Clamp II Pro is on the side of the footboard, rather than under it. Oiles® Bearing Hinge To reinforce durability, the Iron Cobra 900 Series features a thicker 6 mm diameter shaft. Oiles® bearings create far less friction than standard ball bearings. They also eliminate unwanted side-to-side motion while providing superior durability. (Oiles® bearings is a registered trademark of the Oiles Co., Ltd.). Speedo-Ring TAMA eliminated another source of friction by replacing the traditional nylon rocker cam with the Speedo-Ring, a rocker cam with a high quality built-in ball bearing rocker. The Quick-Hook not only allows for easy setup and tear-down but also streamlines the pedal, allowing quick stowaway in the hard case without removing the beater. Drum Hammer Rolling Glide LiteSprocket Weighing in at 40% less than our previous Iron Cobra cam, the round, Rolling Glide "LiteSprocket" revolves naturally and smoothly, contributing to a lighter more responsive feel.  
Samtals m/vsk
49.990 kr.
Á lager

Tama HH905RH Remote Hihat

As music has progressed, drummers have often gone from being just timekeepers to contributing more broadly to musical expression. This has led drummers to explore more flexible and creative setups enabling greater artistic freedom on the drum kit. One particular limited component of the drumset has been the traditional hi-hat stand. In response, we are proud to release a new Remote Hi-Hat which eliminates the physical limitations of the standard hi-hat stand and allows for ultra-flexible hi-hat positioning, for any setup.Our goal with this new Remote Hi-Hat was to create the smoothest action and precision possible, to go toe-to-toe with high-end traditional hi-hat stands. Accomplishing this is difficult for a number of reasons, including that for most drum setups, the cable needs to bend. After much research and development, we were able to achieve our ambitions by partnering with JAGWIRE™, a company that develops brake cables for the world's best mountain bikes.The new Remote Hi-Hat offers virtually unlimited setup flexibility for hi-hat positioning, with hardly any sacrifice in feel or response. We hope this freedom in positioning will allow drummers to continue exploring new sonic ground and further push the boundaries of music. SHARE:   Features Quick-Set Hi-Hat Clutch (US.PAT.NO.9812101) With just one touch, the Quick-Set Clutch can be attached or removed - simply push the button on the side of the clutch. The clutch also allows the top hi-hat cymbal to float more freely, maximizing the natural resonance of the cymbals. Non-Loosening Tension Rod Specially shaped plastic and metal nuts fit together perfectly to keep the cymbal rod from loosening while playing. JAGWIRE™ Triple-Layered Ultra-Smooth Cable We developed this cable with the full cooperation of the JAGWIRE™ company, which produces brake cables for some of the world’s best mountain bikes. We started with a high strength stainless steel wire that has been proven effective in the most rigorous bike races.We then adopted a three-layer covering for the cable that boasts a very high flex resistance. To achieve the smoothest operation, we first polish the stainless steel wire, and then cover it with a lubricated tube, which reduces friction. Then we cover that tube with a circular hi-carbon coil, and finally wrap that protective covering made of PVC.This exclusive three layered construction leads to extreme durability without sacrificing smoothness or response… even for complex setups which require the cable to be bent in numerous places.We are confident we have produced a Remote Hi-Hat with playability and flexibility that is unparalleled by other products on the market. Exchangeable Cable HH905RH comes with 2,300mm cable. Shorter 1,200mm cable is available separately.- HH905RH2L (2,300mm)- HH905RH2S (1,200mm) Clamp & Ratchet Arm MC66 Universal Clamp and Ratchet Arm (Φ12mm, Arm Length: 200mm) are included. Lever Glide The lever glide provides a versatile hi-hat for all style of playing. Even if you use a heavy bottom cymbal in the top position, you can still play astoundingly fast and powerfully. You will get a tight, crisp sound when the hi-hat is closed and be able to play with incredibly delicate nuances by half-opening and closing the hi-hat. Dual Leg Our two-leg design is not only easier to set up in limited spaces, it's actually more secure than the standard three-leg design. The secret is in the small stabilizer under the footboard which effectively shifts the balance and strength of the stand toward the player. Since there's no steel plate under the footboard, Iron Cobra hi-hats are foldable for quick set-up, fast tear down, and easy portability. Cable Holders HH905RH comes with 6 pcs of rotating cable holders, which securely hook the cable with bass drum tension bolt to prevent undue noise and migration. Carrying Bag Securely holds remote hi-hat stand with hook-and-loop fastener straps inside the bag. Clamp and ratchet arm can be also stored in the inside pocket. 6-Way Tension Adjustment Six different levels of tension can be achieved quickly by using the six easily visible settings. Hinge Guard Block We've changed the construction of the Bearing Hinge on the footplate from a one-piece assembly to two pieces, which holds the bearing more evenly?minimizing stress, and maximizing smoothness, while adding to the pedal's sense of power. Glide-Tite Grip Joint (US.PAT.NO.9631656) Our new Glide-Tite Grip Joint allows for a more secure attachment by using a metal-to-metal contact point. This provides an extremely solid anchor and complete isolation for a tom or cymbal. Because the stand does not move with the instrument, the natural resonance of that instrument is maximized. SPEC Details •JAGWIRE™ Triple-Layered Ultra-Smooth Cable•Cable Length : 2,300mm (Shorter 1,200mm cable is available separately)•Lever Glide•Quick-Set Hi-Hat Clutch•MC66 Universal Clamp•Ratchet Arm (Φ12mm, Arm Length: 200mm)•Dual Leg•6-way Tension Adjustment•Cable Holders (x 6)•Carrying Bag•Weight: 8.1kg (17lbs)
Samtals m/vsk
69.000 kr.
Á lager
< Fyrri | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 |