Fara í efni

Karfan þín

Karfan er tóm.

Standar hljóðnema

Síur

Framleiðendur
Vinsælt
Tónlistarnám
Tilboð (pakkatilboð)
Vaxtalaust lán
Gott fyrir byrjendur

K-M Mic klemma á stand 3/8"

The robust clamping element with the ergonomic clamping screw provides for a quick and easy mount to tubes with a diameter of up to 30 mm. Thanks to the 3/8" screw all K&M iPad holders or Tablet PC holders can be mounted easily.  Alternatively, an additional microphone or other accessories (with 3/8" threaded connector) can also be mounted. 
Samtals m/vsk
4.590 kr.
Á lager

K-M Mini boom arm

The short moveable microphone boom arm is suitable for many applications. It is particularly appropriate for overhead uses. There are 3/8“ and 5/8“ threaded connectors to take the microphone holder. Thanks to the flexible clamping, the boom arm can be positioned in length and angle with one simple movement.
Samtals m/vsk
3.990 kr.
Á lager

K-M Boom arm single

Short one-piece boom arm with 3/8" thread. Locking washer and plastic grip. Smooth adjustment. Easy to tighten with wing nut. 
Samtals m/vsk
3.290 kr.
Á lager

Presonus Shockmount f/PX1/M7

Shock mount for the PreSonus PX-1 and M7 microphones. Experienced recordists know that mechanical handling noise and environmental vibrations are very easily picked up by sensitive microphones—and the low bumps and rumbles they create can ruin otherwise perfect recordings! Keep physical vibrations out of your microphone and ensure the best-possible recording quality with the SHK-1 shock mount. The SHK-1 isolates your microphone from the mechanical vibrations of the physical world—meaning when you record, you only have your voice or instrument to worry about.
Samtals m/vsk
4.990 kr.
Á lager

K-M Thread adapt. 5/8-3/8 Zink

5/8" 27 gauge female thread, 3/8" male thread.
Samtals m/vsk
690 kr.
Á lager

K-M Mic festing m/ gripkló

This exclusive microphone arm with a 3/8" or 5/8" thread connector in a modern design with a new innovative table clamp for quick and easy positioning of a microphone in the studio or at a multimedia work station. The 6 m long internally guided microphone cable has a 3 pin XLR plug connector. Microphones to max. 1.5 kg are easily held in any position. The clamping width of 10 to 51 mm / ø 15 to ø 51 mm allows the clamp to be attached to a wide variety of surfaces. The stable metal construction with high quality plastic inserts guarantees secure and strong hold. The cleverly shaped clamping parts allow the clamp to be used on smooth surfaces and round-shaped tubes. The microphone arm can also be fixed with the table flange 23855 available as an optional extra.
Samtals m/vsk
6.090 kr.
Á lager

K-M Mic Boom Arm "Luxo" nýtt!

This exclusive microphone arm with a 3/8" or 5/8" thread connector in a modern design with a new innovative table clamp for quick and easy positioning of a microphone in the studio or at a multimedia work station. The 6 m long internally guided microphone cable has a 3 pin XLR plug connector. Microphones to max. 1.5 kg are easily held in any position. The clamping width of 10 to 51 mm / ø 15 to ø 51 mm allows the clamp to be attached to a wide variety of surfaces. The stable metal construction with high quality plastic inserts guarantees secure and strong hold. The cleverly shaped clamping parts allow the clamp to be used on smooth surfaces and round-shaped tubes. The microphone arm can also be fixed with the table flange 23855 available as an optional extra.
Samtals m/vsk
35.990 kr.
Á lager

K-M Mic "table flange" m/ armi

Black base and tube with 3/8" thread.
Samtals m/vsk
3.790 kr.
Á lager

KM framl. á mic stand 15cm

Extension rod for universal holder 18817. Steel tube, powder coated ø 25 x 153 mm. One side 3/8" male, other side 3/8" female thread.
Samtals m/vsk
2.790 kr.
Á lager

K-M 1/4"-3/8" breytir á mic st

More room for maneuvre! The flexible universal joint can be used on practically any microphone stand and gives you more freedom than ever by providing maximum flexibility for positioning a range of equipment such as microphones, hand-held recorders, etc. Included are a 3/8" female thread and 1/4" male thread. The integrated thread adapter allows for even more combinations. 
Samtals m/vsk
3.790 kr.
Á lager

K&M OVERHEAD MICROPHONE STAND

Mobile heavy steel microphone stand for studio or stage. 10 kg cast metal base, low centre of gravity for high level safety with 3 lockable castor wheels. Rod combination extends to over 2 m with additional locking mechanism. Extendable boom arm with a 3 kg counterweight and 5/8" connecting thread. Additional mini boom arm with 5/8"- and 3/8"- connecting thread, fully adjustable regardless of the position of the main boom arm, e.g. to use with studio microphones. 
Samtals m/vsk
57.990 kr.
Á lager

K-M Mic mic festing m/bómu

This variable microphone clamp has everything you need. A sophisticated mechanism allows the clamp to be rotated 360°. At the same time the height and position can be varied as required. A supplementary extension tube can be used for an even greater range. The clamping width of 10 to 51 mm / ø 15 to ø 51 mm allows the clamp to be attached to a wide variety of surfaces. The stable metal construction with high quality plastic inserts guarantees secure and strong hold.The cleverly shaped clamping parts allow the clamp to be used on smooth surfaces and round-shaped tubes. 
Samtals m/vsk
8.990 kr.
Á lager

Keyb.st. Boom Arm

Keyboardstand Boom Arm f. 18950 og 18953.
Samtals m/vsk
7.990 kr.
Á lager

K-M Mic Boom Arm "Luxo" w/cabl

Our popular, smooth-running microphone desk arm with 3/8" or 5/8" thread connector for sound studios and multimedia work stations with a new innovative table clamp. Easy to position and suitable for microphones to max. 0.8 kg. The 5 m long microphone cable with a 3 pin XLR plug connector is included in the delivery. Having a clamping range of 10 to 51 mm / ø 15 to ø 51 mm the clamp is suitable for a wide spectrum of mounting. The stable metal construction with high quality plastic inserts guarantees secure and strong hold. The cleverly shaped clamping parts allow the clamp to be used on smooth surfaces and round-shaped tubes. The microphone arm can also be fixed with the table flange 23855 available as an optional extra.
Samtals m/vsk
19.990 kr.
Á lager

AmDJ PRO-MS2 Mic st.round base

Beinn hækkanlegur hljóðnemastandur með hringlaga steypjárnssökkli.
Samtals m/vsk
6.990 kr.
Á lager

K-M Mic Boom Stand overhead

Especially designed for studios and drummers. Taller and longer than most stands. Long legs fold for compact storage and easy transport.  
Samtals m/vsk
16.990 kr.
Á lager

K-M Hljóðnemaborðst. örlítið

Samtals m/vsk
2.590 kr.
Á lager

K-M headph. festing á borð

The new headphone holder including an innovative table clamp is a guaranteed secure and comfortable holder for your headphones. The holder protected with soft rubber can easily hold 2 standard headphone sets and 2 in-ear headphones can additionally be hung on the front. The headphone holder can be fixed in four different directions using the clamping screw. In addition the holder can be rotated from any position by 90°. The clamp can be extended from 0 to 48 mm allowing it to be mounted on a wide variety of tables. The stable metal construction with high quality plastic inserts guarantees a secure and strong attachment. The cleverly shaped clamping parts allow the clamp to be used on smooth surfaces and round-shaped tubes.
Samtals m/vsk
5.990 kr.
Á lager

K-M Univ. holder f/ Omega ofl.

Useful accessory for the table-style keyboard stands »Omega« 18800, 18810 and 18820, as well as 18950 and 18953. With the correct adapter the universal holder can be mounted to the table-style keyboard stands: 18814 for »Omega«; 18954 for the 18950 and 18953 (this is only required, if an accessory is already mounted to the existing support tubes). The height of the vertical tube can be adjusted individually choosing from 8 positions. The 3/8" i.e. 5/8" threaded connector connects other accessories, such as boom arm, gooseneck, iPad holder, Tablet PC holder etc.
Samtals m/vsk
4.790 kr.
Á lager

K-M Spjaldtölvu st. á borð

This table stand for smartphones and tablets is both stylish and functional. Holder accommodates devices from 10.2 to 13” in size, corresponding to a clamping range from 130 to 224 mm. The brackets and mounting surface are coated with non-slip rubber for added stability and peace of mind and a gentle grip. Ball-shaped head allows infinitely variable, individual positioning. The extension arm rotates 360° and is infinitely adjustable at angles from 0 to 150°. Sturdy foot design features a metal plate and base with 4 non-slip feet. The base also holds an Allen wrench (hex key) and has a convenient cable opening.
Samtals m/vsk
7.490 kr.
Á lager
< Fyrri | 1 | 2 | 3 | 4 | 5 |