Fara í efni

Karfan þín

Karfan er tóm.

Standar hljóðnema

Síur

Framleiðendur
Vinsælt
Tónlistarnám
Tilboð (pakkatilboð)
Vaxtalaust lán
Gott fyrir byrjendur

K-M Ring Lock adapter f/hátalarastand

Steel adapter sleeve attaches to speaker stands with tubing diameter of 35 mm, mounts with a locking screw. Integrated unique patented expanding mandrel system which provides a tight and firm fit for the speaker. The moveable plastic splints separate the speaker from the stand creating a vibration-free connection.  
Samtals m/vsk
10.590 kr.
Á lager

K-M XLR Míkrafón st. m/ gæsahálsi

Professional stand with wired XLR connections and additional gooseneck. This premium stand allows the microphone to be connected directly to the stand without a microphone clamp or external cable. There is an angle plug 3-pin XLR connector at the lower end of the tube for cable connection. High-quality digital audio cables are built into both the microphone stand and the gooseneck. These are drawn in, soldered and tested by hand at the KLOTZ AIS factory in Germany. The powder-coated stand has a height of 1,165 mm and can be extended to 1,520 mm with the included gooseneck. The robust, short full metal feet with impact sound absorbing foot caps ensure an excellent, space-saving positioning and are simply folded away for transportation.  
Samtals m/vsk
25.990 kr.
Á lager

K-M Gæsaháls 30cm svartur 3/8"

3/8" female and male thread.
Samtals m/vsk
4.590 kr.
Á lager

K-M Microphone bar 1>6 850 mm

Extra-long microphone bar (850 mm) for different recording techniques. Stable, vibration-free design. 6 elongated mounting slots including knurled screws for continuous adjustment.
Samtals m/vsk
9.990 kr.
Á lager

K-M Gæsaháls 20cm svartur -nýtt!

3/8" female and male thread.
Samtals m/vsk
3.790 kr.
Á lager

SHURE Nexadyne 6 drum klip

Drum Mount for Nexadyne 6 Tom/Snare Microphones
Samtals m/vsk
5.290 kr.
Á lager

K-M Smartphone/tablet holder festing

With this universal holder, your digital device is always within reach. The holder is equally suitable for smartphones and tablets. The clamping width ranges from 120 to 150 mm and with a depth of 15 mm, the electronic devices can also be used with a thick cover or case. Operation is quick and easy. Simply pull the rubber-protected clamping jaws apart and tighten with spring force. Thanks to the ball joint, the holder can be tilted up and down and rotated through 360°. The flexible mounting arm provides additional individual positioning. A sturdy clamping element with user-friendly wing nut enables quick installation on any tube from 10 to 30 mm in diameter.  
Samtals m/vsk
5.190 kr.
Á lager

K-M Míkrafónst. beint lóð-létt HVÍTT

Cast-iron round base, with anti-vibration rubber insert for noise filtration.  
Samtals m/vsk
11.990 kr.
Á lager

K-M Gæsaháls 30cm XLR m/úttaki svartur

This handy gooseneck with 3-pin XLR socket and 3/8" internal thread is flexible and extremely stable. The high-quality gooseneck has a side cable outlet and has a length of 350 mm and a diameter of 15 mm.  
Samtals m/vsk
8.990 kr.
Á lager

K-M Mic festing á BD

Compact holder to attach microphones to drums, esp. bass drums. The microphone can be slided up to 70 mm on the mounting rail and placed very near to the drum. Easy mounting, no parts to lose. Rubber washer and inserts absorb noise and shock, "RIMS" suitable. With 3/8" thread.
Samtals m/vsk
3.790 kr.
Á lager

K-M Universal wall mount

Universal wall mount with 3/8" or 5/8" mounting bolt for microphones and antennas. Thanks to the user-friendly ball joint, the mount can be swiveled 360° and tilted 90°. The mounting plate has a diameter of 70 mm and the wall distance is 205 mm.
Samtals m/vsk
6.590 kr.
Á lager

MXL USM-002 Shockmount Small

Universal Shockmount - Fits most MXL Mics
Samtals m/vsk
9.990 kr.
Á lager

K-M mic stand framlenging 13cm. 3/8" thread

One side 3/8" female thread, other side 3/8" male thread. Powder-coated steel.
Samtals m/vsk
1.390 kr.
Á lager

K-M "Luxo" borðfesting/klemma

ATH aðeins klemma sem festist á borð, ekki armur. 
Samtals m/vsk
4.190 kr.
Á lager

Austrian Audio SB1 Stereo bar

Dual Mounting Bar for 2 Austrian Audio Microphones for Stereo Recording.
Samtals m/vsk
9.990 kr.
Á lager

K-M Tablet PC stand with boom arm

Stable tablet PC stand with space-saving round base and boom arm for use at home, in the studio or on stage. The 300 mm and 4.5 kg cast iron base gives the functional stand a secure footing. With full extension plus vertical boom arm, this results in a max. tablet support height of 1,430 mm. The ... more  
Samtals m/vsk
18.590 kr.
Á lager

K-M Smartphone holder festing f/ síma

With this universal holder, your smartphone is always within reach. The holder is suitable for all flat devices with a width of 45 to 90 mm. The operation is quick and easy. Insert smartphone - press clamping jaws together - done. The device is released again at the touch of a button. The clamping jaws with integrated rubber pads guarantee a secure hold. The movable supports can also be folded away completely if necessary. Thanks to the ball joint, the holder can be tilted up and down and rotated through 360°. The flexible support arm provides additional individual positioning. A sturdy clamping element with user-friendly wing nut enables quick installation on any tube with a diameter of 10 to 30 mm.
Samtals m/vsk
3.090 kr.
Á lager

K-M Tablet PC holder

Universal tablet holder with a convenient clamping mechanism for tablets ranging in size from approx. 10" to 16" in horizontal - and approx. 7" to 13" in vertical position. The clamping range of the tablet PC holder is between 155 and 307 mm The tablet holder is made of bio-based plastic. These plastics contain a proportion of over 50% up to 100% of renewable vegetable raw materials. The use of renewable raw materials helps to conserve limited petroleum resources and reduce harmful CO2 emissions. More information on bio-based plastics at: bioplastic.k-m.de. The holder is also particularly suitable for tablets with a protective cover or case up to 18 mm thick. The overlapping clamping jaws with integrated rubber pad guarantee a secure hold and eliminate unwanted vibration noise. The function of the operating elements on the device an the tablet pencil (portrait format only) are not impaired. The holder can be tilted, allowing each user to position it individually. Whether on stage, in the rehearsal room or at home - thanks to the 3/8" or 5/8" internal thread, the holder can be quickly and easily screwed onto any microphone stand.
Samtals m/vsk
5.790 kr.
Á lager

K-M Mic Stand 3ja liða m/bómu

Three-piece telescoping shaft. Metal, non-marring height-adjustment mechanisms, complete with boom arm. 
Samtals m/vsk
15.990 kr.
Á lager

K-M Mic Stand 3ja liða

Extremely compact microphone stand. Three-piece shaft, non-marring height-adjustment system, lightweight plastic base with folding legs.
Samtals m/vsk
12.388 kr.
Á lager
< Fyrri | 1 | 2 | 3 | 4 | 5 | 6 |