Fara í efni

Karfan þín

Karfan er tóm.

Nýtt
IK TONEX Capture reamp box/modeller
VNR.: 2669IPTONEXAMPCAPTIN

IK TONEX Capture reamp box/modeller

Samtals m/vsk
35.990 kr.

TONEX Capture is an all-in-one accessory that makes it easy to capture your real amp’s tone perfectly, with or without microphones. It’s the ideal way to tone model your gear using the TONEX software, but also the perfect
reamplification device.

Framleiðandi ik multimedia produc
Samtals m/vsk
35.990 kr.

Nánari lýsing

The perfect all-in-one companion for Tone Modeling and reamplification

 
 
 
  • Three accessories in one: Tone Modeling, amp recording and reamplification
  • Connects your audio interface to your amps and cabinets with the correct signal level
  • Capture your amp tone pre-cabinet without the need for microphones or load boxes
  • Ground lift and galvanic isolation eliminate hum and noise
  • Ideal for capturing Tone Models, also the perfect tool for reamplification
  • Comes with TONEX SE (includes 200 Tone Models)
 

TONEX Capture is an all-in-one accessory that makes it easy to capture your real amp’s tone perfectly, with or without microphones. It’s the ideal way to tone model your gear using the TONEX software, but also the perfect
reamplification device.

 
 
 

There are two separate gain stages that allow you to adjust levels to and from your amp.

First, TONEX Capture connects to the output of your audio interface and allows you to feed that signal to your amp at just the right level using the left attenuation control.

Second, TONEX Capture connects to your amplifier’s line out (a speaker must be connected) or pedal output and allows you to feed that signal to your interface at the right level using the right attenuation control.

The end result is a pristine copy of your amp’s real tone, ready for TONEX modeling or any other use you can imagine.

 
 
image
12345
iRig-Keys-2_back_big_opt_red
123456

Record your rig, your way

TONEX Capture gives you the freedom to capture your rig any way you want. Connect your amp, combo or pedal to your audio interface and use the TONEX Machine Modeling software to create a high-quality Tone Model of your rig you can use anywhere.

 

 

 
 
 
 
img

Direct Amp

  • TONEX Capture allows you to feed your amp with exactly the right signal using the left attenuation control
  • TONEX Capture “From Amp” circuit takes a copy of your amp’s direct output and safely sends it back to your audio interface’s input

Capturing the signal direct means you can record anywhere, without microphones or sound isolation. You can use TONEX’s and AmpliTube’s VIR™ technology to access hundreds of ultra-authentic virtual cabs and IRs to complete your tone.

 

Amp + Cab

Have access to a nice mic collection and recording space? You can also use TONEX Capture to capture your sound including your cabinet.

  • Connect TONEX Capture to your amplifier and audio interface as usual
  • Mic up your cabinet as you prefer using your interface or standalone mic preamps

Capture your rig’s exact tone without sacrificing flexibility. TONEX’s AI Machine Modeling is so advanced it can even remove the cabinet sound after the fact, letting you virtually audition other cabs and mics to see how they improve your tone.

 

Amp + Cab Plus Direct

The best of both worlds. Connect both direct amp and amp + cab for ultimate freedom to build the best guitar or bass tone.

  • Use both the TO AMP and FROM AMP circuits, plus mic up your cabinet
  • The TONEX software can capture either mic’d or direct signal for Tone Modeling

Since Capture’s FROM AMP circuit is totally passive, it won’t impact the load on your amp or color your tone in any way.

 

Pedals

TONEX Capture makes it easy to tone model pedals, or just route your recordings through your pedal collection for analog color and warmth.

  • Connect your audio interface to a pedal using Capture’s TO AMP circuit
  • Send the pedal back to your interface’s instrument input

It’s that simple!

 

Download and share your favorite tones

TONEX Capture includes access to ToneNET, letting you upload your favorite tones and download limitless free tones from other users around the world.

For some extra inspiration, it also includes 200 Premium Tone Model downloads and free access to user generated Tone Models.

Nýlega skoðað

Effekta pedalar - Fleiri vörur

Nýtt

KSR Amplification EROS

It’s not your typical boost. It will boost clean without overdrive, add a little grit, or add distortion. It has a 3-band active EQ for precision sculpting. Use it in front to add volume or grit to a clean or crunch channel. Or, sculpt your amp’s distortion response, as you would with a typical boost. However, you’re no longer limited to a narrow frequency range dictated by a single tone control found on a lot of classic boosts. Similarly, use it before or after the Ceres for even more control over its tones, and in order to get the most out of it based on your power amp situation.
Samtals m/vsk
48.990 kr.
Á lager
Nýtt

Origin Effects DCX BOOST

The greatest pieces of studio gear are the ones that add something special to the sound of an instrument, going beyond the job they were designed for and enhancing anything that passes through the circuit. One such piece is the UA 610 preamp, which was the inspiration for the DCX Boost. This retro console preamp is famous for adding vintage, analogue colour to a signal, as well as precise control of level and EQ. Push the level harder and you get rich, harmonic saturation of the kind that makes analogue hardware a must-have in any present-day studio. The DCX Boost reimagines this classic preamp as a tone-shaper and drive pedal for guitar, with a wide range of clean and overdrive tones, EQ frequencies optimised for the instrument, and our Adaptive Circuitry providing a treble response that reacts to playing dynamics. It’s a signal-boosting, tone-enhancing pedal straight from the studio!
Samtals m/vsk
51.990 kr.
Á lager
Nýtt

Origin Effects DCX BASS

The greatest pieces of studio gear studio gear are the ones that add something special to the sound of an instrument, going beyond the job they were designed for and enhancing anything that passes through the circuit. One such piece is the UA 610 preamp, which was the inspiration for the DCX Bass. This retro console preamp is famous for adding vintage, analogue colour to a signal, as well as precise control of level and EQ. Push the level harder and you get rich, harmonic saturation of the kind that makes analogue hardware a must-have in any present-day studio. The DCX Bass reimagines this classic preamp as a tone-shaper and drive pedal for bass guitar, with a wide range of clean and overdrive tones, EQ frequencies optimised for the instrument, and our Adaptive Circuitry providing a treble response that reacts to playing dynamics. It’s a signal-boosting, tone-enhancing pedal straight from the studio!
Samtals m/vsk
51.990 kr.
Á lager
Nýtt

KSR Amplification VESTA

The Vesta™ contains a brand new set of voices along with a familiar feature set. Based on a couple of your favorite amps of the 80s and 90s, you’ll feel right at home. Picture a classic Crunch tone suitable for rock and blues, along with a familiar 90s high-gain sound. If modern extended range high-gain is your thing, the Ceres™ delivered. If you’re more at home on a 6 string, the Vesta™ may be your preference. It’s smooth, chunky, thick, and more low-mid focused. It takes boosts just like your favorite vintage high-gain amps. It responds incredibly well to the guitar’s volume control. Note: The Clean channel is identical to the Ceres’.
Samtals m/vsk
79.990 kr.
Á lager