Keely Electronics Seafoam Plus

Nýtt

Nánari lýsing

We are proud to announce the all new Seafoam Plus Chorus – True Chorus and ADT with Reverb. It will forever change the way you think about chorus, because we have developed a new type of chorus that until now has only been available in expensive DAWs and in studios. Not only is it tuned for guitar, but there are voices and modes created specifically for bass players including flanging and tremolo. Lastly, this tri-mode chorus pedal offers internal switching for vintage and modern tones, further doubling the amount of sounds you can get.

ADT: THE NEW DEFINITION OF CHORUS. In the Seafoam Plus Chorus you get the automatic doubler that we developed in the revolutionary 30ms Double Tracker. Our ADT chorus is what we call True Chorus, because we create a second and third voice–like singers in a choir. Not only do they sing at different times, they sing at different pitches. True Chorus.

Seafoam Mode: You guessed it… the all new Seafoam Plus Chorus–lush, wide, and with a very musical vibrato. It gives you the lush sounds and tone of a vintage BBD analog chorus unit. This is where you’ll find a typical chorus feature. The Seafoam Mode of the pedal has an LFO, the regularly cycling part you hear in most every other chorus unit. It provides a classic tone that you expect and which has become part of many classic tunes. Set the rate for slow and the depth for wide, and enjoy a really spacious sounding chorus. Roll the Mix Control all of the way up for Vibrato. With the Space control acting as a Tone Control in this mode, you can go from bright to vintage warmth, dialing in the perfect chorus.

Dual Chorus Mode: We created a frequency crossover-based dual-chorus engine. Imagine a dividing line that is centered on your high E-string. Control the depth of chorus independently for highs and lows. Craft the ultimate “Come As You Are” Nirvana of chorus tones. Create a very deep, throbbing chorus on the low end, and a near perfect calm on the top end. Or make the high-end and shimmer and waver while keeping the low end fixed!

ChoralFlangelo

OK, it goes twice as deep. The Seafoam Plus Chorus is a Bass Chorus, Flanger, and Tremolo too! Pop off the back, flick a switch, and it’s a bass guitar player’s dream. The Space Controls gives you controls or Regeneration, High-pass filtering to keep things tight, and a haunting Tremolo you have to hear to believe! o let’s get down and funky, Michelangelo!

Vintage at Heart

Want a softer tone? Chorus that’s silky smooth and warm? No problem. Internal switching puts it in “Vintage Mode.” The Keeley Seafoam Plus Chorus ships in “Modern Mode” for ultra wide, lush, and high-fidelity chorus. Either way, enjoy sounds that are downright frighteningly good. Makes you wonder, “Is that my fingers playing that tone?!?”!

Seafoam Plus Chorus Modes

Dimension Chorus – Automatic Double Tracker

RATE/TUNE: Adjusts the Tune/Pitch of Double Tracked voices by 0-21 cents
DEPTH/TIME: Adjust the time delay in the Double Tracked voices by 0-21 milliseconds (ms)
SPACE: Abbey Chamber Reverb
BASS MODE: Flanger with Space knob for Positive and Negative Feedback control. Center position is 0% Feedback. Works perfectly on guitar too.

Seafoam Plus Chorus

RATE/TUNE: Rate from 0.1 – 7 Hz
DEPTH/TIME: Depth from 0-20 ms
SPACE: Tone Control – +/- 6dB @ 500Hz
BASS MODE: Tone Control -6dB @ 100Hz to +6dB @ 200Hz

Special Notes: This is a simulation of our popular Seafoam Chorus and other popular vintage chorus pedals.

Dual Seafoam Plus Chorus

RATE/TUNE: Rate from 0.1 – 7 Hz
DEPTH/TIME: Depth of the High Band Chorus 0-10ms
SPACE: Depth of the Low Band Chorus 0-15ms
BASS MODE: Chorus on Top End – Haunting, Throbbing Tremolo on Bottom end.

Special Notes: High Band chorus is delayed by 8ms and Low Band by 6ms. Provides Wide Lush chorus on top and Focused Musical Chorus on bass. Ultra wide and watery sounds! For Bass Mode: Band is split Chorus on Top and Tremolo on Bottom.

Technical Specifications On Seafoam Plus Chorus:

Mode	Rate	Depth	Space	Notes
Dimension	Tune/Pitch (0-21cents)	Time (0-21ms)	Reverb	Heavily modified Abbey Chamber type reverb.
Seafoam	Rate (0.1 – 7Hz)	Depth	Tone	-/+ 6dB @ 500Hz
Dual Seafoam	Rate (0.1 – 7Hz)	Hi Depth (0-10ms)	Low Depth (0-15ms)	Crossover @ 659Hz(12th fret of Hi E). Rate controls both hi and low (Lo 0.666 of Hi ). Hi is delayed by 8ms, Lo delayed by 6ms

Bass Flange	Rate (0.1 – 3.5Hz)	Flange Depth	-/+ Feedback	Space controls pos and neg feedback, 0 feedback in center
Seafoam Bass	Rate (0.1 – 7Hz)	Depth	Tone	-6dB @ 100Hz to +6dB @ 200Hz
Dual Bass	Rate (0.1 – 7Hz)	Hi Depth Chorus	Lo Depth Tremolo	Hi/Lo crossover @ 200Hz (12th Fret G). Rate controls both hi and lo (Lo 0.666 of Hi). Hi is delayed by 8ms. Lo is a tremolo.

Fender Santa Ana Overdrive V2

Santa Ana V2 is a JFET-based class-A overdrive pedal running at 18V internally — a design that provides the touch sensitivity and high-headroom drive that players expect from a Fender tube amp pushed hard and then some. At its heart, this dual-voice drive circuit sports three straightforward controls and a Voice switch to push your guitar from natural-sounding tight overdrive (voice A) to smooth, thick lead tones (voice B). The Drive and Tone controls provide a wide range to dial in just the right flavor of gain and treble presence in the drive signal, while the rear-mounted Tight switch pulls some pre-drive bass frequencies out for an even more focused feeling drive. To further sculpt the frequency response of your drive, a standalone, independently switchable 3-band EQ circuit is built around the Santa Ana V2 drive engine. Active Bass, Middle, and Treble controls offer a wide range of adjustment, cutting or boosting each frequency range with a center detent to mark flat response. Determine exactly how the EQ circuit interacts by using the EQ Placement switch to stack the EQ before or after the drive: Pre-drive EQ flavors the overdrive’s response by determining which frequencies are clipped most by the drive circuit; post-drive EQ lets your guitar hit the drive head on and shapes the resulting gain tones for a more dramatic EQ effect. With a fine-tuned JFET drive engine, independent EQ circuit, conveniently switchable buffered and true bypass modes, and multiswitch enabled footswitches for momentary and latching activation, the Santa Ana V2 is an ultra-flexible, intuitive overdrive with tons of tones on tap.

Samtals m/vsk

29.990 kr.

Á lager

Fender Pugilist Distortion V2

The Pugilist V2 is a distortion pedal like no other, wielding dual independent distortion engines packed inside one chassis to crank out a wealth of thick tones. Each distortion engine can be turned on separately using its designated footswitch and dialed in using its own Gain, Tone and Level controls. This provides two distinctively flavored distortion voices, with Engine A delivering treble-rich lead drive tones and Engine B laying on thick, heavier distortion. The real magic of Pugilist V2 is in the Path switch, which runs the two distortion engines through three different signal paths as they push each other into harmonically rich saturation. The two Series Modes send one circuit into the other for stacking drive tones that can be layered like amp channels, using the footswitches to kick into the next level of cascading distortion. Parallel Mode delivers deep tone-shaping by running the two engines side by side to be blended and balanced using the level controls to create the perfect meld of articulate, chunky distortion. Featuring global Mid Cut and Bass Boost switches, conveniently switchable buffered and true bypass modes, and multiswitch enabled footswitches for momentary and latching activation, these ever-sparring distortion circuits knock out huge distortion tones with modern conveniences fit for any board.

Samtals m/vsk

29.990 kr.

Á lager

Fender Pelt Fuzz V2

The Pelt V2 is a pro-level fuzz pedal with a classic spirit. Built around silicon transistors and a buffer-friendly input stage, it packs all the fuzzed-out tones a saturation-lover could ask for — from full, biting octave fuzz to smooth, harmonically rich walls of gain. Beyond traditional Fuzz, Tone and Level controls, the Pelt V2 takes saturation shaping to the next level with Sag and Bloom controls to fine tune exactly how your signal breaks and splatters into furry, gain-ladened madness. Use the Mids and Thick switches to deliver extra EQ shaping for mid and bass frequency presence to instantly push into new characters of fuzz. The Octave (Chaos) footswitch takes this fuzz into all-new territory by adding a traditional octave-up effect or, with Chaos engaged, an asymmetrical octave effect for glitchy, sputtering artifacts and unpredictable tonal chaos. To top it off, this buffer and bass friendly pedal features a Blend control that enables mixing of fuzz and clean tones (perfect for bass) or blending fuzz with the drive tone of pedals before it in your signal chain. Featuring conveniently switchable buffered and true bypass modes, multiswitch enabled footswitches for momentary and latching activation, and a world of tone-shaping tools for dialing in the exact fuzz you’re after, the Pelt V2 is the ultimate way to add a gloriously wooly coat to your tone.

Samtals m/vsk

29.990 kr.

Á lager

Fender Bends Compressor V2

An intuitive compressor/boost combo offering low-noise compression in both modern and vintage tube flavors, the Bends V2 is ideal for guitar and bass alike. Utilizing a unique take on OTA technology for real-time gain control, this compressor reacts to your playing dynamics smoothly and naturally to balance the volume of louder and quieter sections while adding sustain and thickness to your notes. The Bends V2 simplifies compression to three clearly labeled controls — a three-speed Attack switch, a fine-tuned Release control, and an Input control which sets the input level of the compression trigger. An active Tone control with a center detent cuts or boost treble to make up for any lost sparkle, and the Blend control injects clean into the mix to provide the perfect balance of clean dynamics and compression. A rear-mounted Vintage switch provides the real secret sauce, reshaping the circuit from a crisp, surgical action to a beautifully colored smooth compression with a hint of natural saturation when engaged. Combine boost and compression for some real magic. The Comp Pre/Post switch rearranges the internal circuit to reorder the independent ultra-clean boost and compression. Place the boost before compression for soaring Nashville-style sustain or stack the boost after your signal is compressed and kick it on for a solo boost to increase the overall output level into your next effects. Featuring an independent boost circuit, switchable buffered and true bypass modes, and multiswitch enabled footswitches for momentary and latching activation, the Bends V2 is a fully featured compressor that brings natural feeling dynamic control to any instrument.

Samtals m/vsk

29.990 kr.

Á lager