VNR.: 7600HXSTOMPXL

Line6 HX Stomp XL

Samtals m/vsk

165.990 kr.

The HX Stomp XL is an expanded version of Line 6's best-selling HX Stomp amp and effects processor. Boasting 8 capacitative-touch footswitches rather than just 3, this tactile "super stompbox" offers greater real-time control than the standard unit yet still maintains a compact, pedalboard-friendly form-factor (smaller than two HX Stomps) — making it practical for any performing or recording scenario!

Framleiðandi Yamaha

Uppselt

Senda fyrirspurn

Samtals m/vsk

165.990 kr.

Nánari lýsing

All-Encompassing Guitar Processor

Use HX Stomp XL as a complete guitar/bass workstation, a backup for your main rig, an add-on tone expander with other modellers or even as a professional-quality audio interface. The HX Stomp XL’s 'Command Centre' functionality, MIDI capabilities and external expression pedal jack also make it an ideal master controller for your entire setup. There's almost nothing it can't do!

300+ Amp, Cabs & Effects!

HX Stomp XL comes equipped with more than 300 amps, cabs and effects — catering for even the most demanding and musically-diverse of players. The 128 factory presets include both vintage and modern sounds based on highly-coveted gear, and there are also presets created specifically for bassists.

Authentic Modelling

HX modelling digitally mirrors the circuitry of analogue amps and effects, component by component. Every model sounds and feels realistic, including notoriously hard-to-capture devices like vintage fuzzes and modulation effects. Simply put, the HX Stomp XL nails the much-desired analogue "vibe".

Powerful SHARC DSP Chip

Featuring the same SHARC DSP chip found in Line 6's flagship Helix products, the HX Stomp XL can run up to 8 processing 'blocks' simultaneously. The extra assignable footswitches let you access and control these blocks in more powerful and efficient ways, meaning that the HX Stomp XL is simply designed to be more flexible for use onstage than the original HX Stomp.

Additional Appointments

Extra intuitive features include a choice of true bypass and DSP bypass with trails, a stereo effects loop that allows you to integrate external pedals or employ 4-cable method, a jack for two external footswitches or an expression pedal, third-party IR support, and a multi-channel 24-bit/96kHz USB audio interface.

'HX Edit' App

The free 'HX Edit' app lets you easily create, save and load presets, as well as customise nearly all pedal parameters. It’s also a preset librarian, IR loader, and more! This app enables you to extract the most from HX Stomp XL.

What Else Does HX Stomp XL Do?

The Line HX Stomp XL has some other small advantages over the standard HX Stomp. Hands-free 'Pedal Edit' mode let you tweak presets with your feet, there are 4 snapshots per preset rather than 3, and you can access the '6 Switch Looper' without needing an external MIDI controller. Other than that, it's HX Stomp but with 5 extra switches!

Key Features

The power of HX Stomp — now with eight footswitches!
Exceptional sound quality with 123dB of dynamic range
Features the same SHARC DSP chip and HX Modelling as Helix processors
Eight capacitive-touch footswitches with colour-coded LED rings
More than 300 HX and legacy amps, cabs and effects — up to 8 simultaneous
Supports third-party impulse responses (IRs)
Includes world-class polyphonic pitch-shifting effects
Split/parallel signal paths for maximum routing flexibility
Dual expression pedal/footswitch input for greater creative control
Stereo effects loop (mono/stereo TRS send and stereo returns)

Fender Santa Ana Overdrive V2

Santa Ana V2 is a JFET-based class-A overdrive pedal running at 18V internally — a design that provides the touch sensitivity and high-headroom drive that players expect from a Fender tube amp pushed hard and then some. At its heart, this dual-voice drive circuit sports three straightforward controls and a Voice switch to push your guitar from natural-sounding tight overdrive (voice A) to smooth, thick lead tones (voice B). The Drive and Tone controls provide a wide range to dial in just the right flavor of gain and treble presence in the drive signal, while the rear-mounted Tight switch pulls some pre-drive bass frequencies out for an even more focused feeling drive. To further sculpt the frequency response of your drive, a standalone, independently switchable 3-band EQ circuit is built around the Santa Ana V2 drive engine. Active Bass, Middle, and Treble controls offer a wide range of adjustment, cutting or boosting each frequency range with a center detent to mark flat response. Determine exactly how the EQ circuit interacts by using the EQ Placement switch to stack the EQ before or after the drive: Pre-drive EQ flavors the overdrive’s response by determining which frequencies are clipped most by the drive circuit; post-drive EQ lets your guitar hit the drive head on and shapes the resulting gain tones for a more dramatic EQ effect. With a fine-tuned JFET drive engine, independent EQ circuit, conveniently switchable buffered and true bypass modes, and multiswitch enabled footswitches for momentary and latching activation, the Santa Ana V2 is an ultra-flexible, intuitive overdrive with tons of tones on tap.

Samtals m/vsk

29.990 kr.

Á lager

Fender Pugilist Distortion V2

The Pugilist V2 is a distortion pedal like no other, wielding dual independent distortion engines packed inside one chassis to crank out a wealth of thick tones. Each distortion engine can be turned on separately using its designated footswitch and dialed in using its own Gain, Tone and Level controls. This provides two distinctively flavored distortion voices, with Engine A delivering treble-rich lead drive tones and Engine B laying on thick, heavier distortion. The real magic of Pugilist V2 is in the Path switch, which runs the two distortion engines through three different signal paths as they push each other into harmonically rich saturation. The two Series Modes send one circuit into the other for stacking drive tones that can be layered like amp channels, using the footswitches to kick into the next level of cascading distortion. Parallel Mode delivers deep tone-shaping by running the two engines side by side to be blended and balanced using the level controls to create the perfect meld of articulate, chunky distortion. Featuring global Mid Cut and Bass Boost switches, conveniently switchable buffered and true bypass modes, and multiswitch enabled footswitches for momentary and latching activation, these ever-sparring distortion circuits knock out huge distortion tones with modern conveniences fit for any board.

Samtals m/vsk

29.990 kr.

Á lager

Fender Pelt Fuzz V2

The Pelt V2 is a pro-level fuzz pedal with a classic spirit. Built around silicon transistors and a buffer-friendly input stage, it packs all the fuzzed-out tones a saturation-lover could ask for — from full, biting octave fuzz to smooth, harmonically rich walls of gain. Beyond traditional Fuzz, Tone and Level controls, the Pelt V2 takes saturation shaping to the next level with Sag and Bloom controls to fine tune exactly how your signal breaks and splatters into furry, gain-ladened madness. Use the Mids and Thick switches to deliver extra EQ shaping for mid and bass frequency presence to instantly push into new characters of fuzz. The Octave (Chaos) footswitch takes this fuzz into all-new territory by adding a traditional octave-up effect or, with Chaos engaged, an asymmetrical octave effect for glitchy, sputtering artifacts and unpredictable tonal chaos. To top it off, this buffer and bass friendly pedal features a Blend control that enables mixing of fuzz and clean tones (perfect for bass) or blending fuzz with the drive tone of pedals before it in your signal chain. Featuring conveniently switchable buffered and true bypass modes, multiswitch enabled footswitches for momentary and latching activation, and a world of tone-shaping tools for dialing in the exact fuzz you’re after, the Pelt V2 is the ultimate way to add a gloriously wooly coat to your tone.

Samtals m/vsk

29.990 kr.

Á lager

Fender Bends Compressor V2

An intuitive compressor/boost combo offering low-noise compression in both modern and vintage tube flavors, the Bends V2 is ideal for guitar and bass alike. Utilizing a unique take on OTA technology for real-time gain control, this compressor reacts to your playing dynamics smoothly and naturally to balance the volume of louder and quieter sections while adding sustain and thickness to your notes. The Bends V2 simplifies compression to three clearly labeled controls — a three-speed Attack switch, a fine-tuned Release control, and an Input control which sets the input level of the compression trigger. An active Tone control with a center detent cuts or boost treble to make up for any lost sparkle, and the Blend control injects clean into the mix to provide the perfect balance of clean dynamics and compression. A rear-mounted Vintage switch provides the real secret sauce, reshaping the circuit from a crisp, surgical action to a beautifully colored smooth compression with a hint of natural saturation when engaged. Combine boost and compression for some real magic. The Comp Pre/Post switch rearranges the internal circuit to reorder the independent ultra-clean boost and compression. Place the boost before compression for soaring Nashville-style sustain or stack the boost after your signal is compressed and kick it on for a solo boost to increase the overall output level into your next effects. Featuring an independent boost circuit, switchable buffered and true bypass modes, and multiswitch enabled footswitches for momentary and latching activation, the Bends V2 is a fully featured compressor that brings natural feeling dynamic control to any instrument.

Samtals m/vsk

29.990 kr.

Á lager