MXR ISO-BRICK PRO Power Supply

Nánari lýsing

THE LONG STORY

The MXR Iso-Brick Pro Power Supply delivers clean, steady voltages to a diverse range of pedal types in a sleek form factor so that you can confidently power your entire board without any extra bulk.

POWERFUL VERSATILITY.

Every one of the MXR Iso-Brick Pro Power Supply’s outputs is fully isolated to preserve signal purity and cut out environmental noise. Catering to an array of power requirements, this unit offers six fixed outputs—two 9V DC at 500mA and four 9V DC at 300mA—and two switchable 9/12/18V DC outputs at 500mA. Even high-demand multi-effects units are covered, with a dedicated 9V DC output at 1.5A for units such as the Line 6 HX Effects processor and HX Stomp amp/processor.

Expanding your setup? The MXR Iso-Brick Pro features a dedicated 18V DC link output at 2.0A so that you can seamlessly connect to a secondary power source such as the MXR Iso-Brick Power Supply or the MXR Iso-Brick Mini Power Supply.

ALL ABOARD.

With its compact, lightweight design, the MXR Iso-Brick Pro Power Supply is perfectly sized to fit under most Pedaltrain pedalboards—and it comes with all the mounting brackets and screws you need to set it up.

POWER UP WITH CONFIDENCE.

The MXR Iso-Brick Pro Power Supply will keep your effects pedals running smoothly and quietly, and its slim-yet-robust construction allows you to keep space open for all of your favorite pedals—whether low-powered analog overdrives or high-powered digital multi-effects processors. Power up with the MXR Iso-Brick Pro Power Supply.

SPECIFICATIONS

INPUT

100–240V~ 50/60 Hz 1.5A

OUTPUT

42W MAX
9V 300mA (x4)
9V 500mA (x2)
9/12/18V 500mA (x2)
9V 1.5A (x1)
18V 2.0A (x1)

DIMENSIONS

235 (W) x 88 (D) x 37 (H) mm
9-1/4 (W) x 3-7/16 (D) x 1-7/16 (H) inches

WEIGHT

0.84 kg / 1.9 lbs.

KMA Machines DUAL LOOP SWITCHER

We get it. There’s a wealth of pedalboard switching devices on the market and some can be quite complex, but what if you want to keep switching between multiple pedals on your board simple, easy to use and yet still effective? Well, the KMA Machines DUAL LOOP SWITCHER pedal has you covered and has been created with a focus on durability, reliability, simplicity and hassle-free operation to expand your creativity. Whether you’re looking to simply switch between two single pedals without extended tap dancing or combine and switch between two entirely separate signal chains, this helpful utility device features KMA’s active circuitry and soft switching for maximum signal integrity without compromise. Plus, with full Stereo/Dual Mono operation the DUAL LOOP SWITCHER allows for maximum flexibility.

Samtals m/vsk

23.990 kr.

Á lager

KMA Machines Active Stereo ABY

There’s nothing new about ABY boxes. They’re a very commonly used accessory and a staple part of many setups out there. But if they are so common, then (until we launched our passive Stereo ABY) why was it so difficult to find one in a stereo format that’s well built, noise-free AND affordable? This is a question we kept encountering as we use many stereo devices daily here at KMA, plus we know that a lot of users are just as mesmerised by the wide sonic worlds of stereo as we are. So, we made a killer stereo ABY switcher to use here at our workshop. In the process we found it so useful, so we decided to make the original STEREO ABY available to the world too in a pedal format. However, despite our passive boxes gracing thousands of rigs the world over, the Active STEREO ABY takes things a little further and is ideal for those who like to use the Y splitting or combining functions – at least with some signals that don’t always play nicely together, due to often differing impedances between connected devices. With KMA’s high quality active buffer, the pedal can also help eliminate level mismatches or even signal loss, if used with long cable runs. Whether you’re looking to switch or combine a Stereo input signal between two separate destinations or switch or combine two separate Stereo input signals into a single stereo output without signal loss, the KMA Machines STEREO ABY pedal is a dependable little helper for your tonal quest – the fate of your Stereo signals is in your hands!

Samtals m/vsk

23.990 kr.

Á lager

KMA Machines Active ABY

ABY boxes are not something that will set the world on fire. We know that. But what a good ABY box can do, is start a flame that’ll fully ignite your creativity, and our Active ABY pedal is a REALLY GOOD one. Expertly built, noise-free, gorgeous looks AND affordable – it just ticks all the boxes. As an additional offering to our Passive ABY box that has graced thousands of rigs the world over, the Active ABY is ideal for those who like to use the Y splitting or combining functions – at least with some signals that don’t always play nicely together, due to often differing impedances between connected devices. With KMA’s high quality active buffer, the pedal can also help with level mismatches or signal loss due to long cable runs. Whether you’re looking to switch or combine your Mono input signal using two separate outputs, switch or combine two separate input signals into one output, the Active ABY pedal is a dependable little helper for your tonal quest – the fate of your signal is in your hands!

Samtals m/vsk

15.990 kr.

Á lager