Fara í efni

Karfan þín

Karfan er tóm.

VNR.: ISO-OREAGRAPHITE

IsoAcoustics Orea Graphite stk

Samtals m/vsk
5.090 kr.

OREA Series: Eliminates parasitic vibrations and provides greater sound clarity and focus. The OREA’s are ideal for electronic components including Amplifiers, DAC’s, CD Players, Speakers, and Turntables. Made of machined stainless steel, these isolators have a low-profile design to minimize any increase in height.

Framleiðandi isoacoustics
Samtals m/vsk
5.090 kr.

Nánari lýsing

Each OREA model is designed with a different weight capacity. They each have a coloured ring on the bottom isolator that denotes the model and weight capacity. The OREA series are packaged individually to allow greater flexibility when determining the number of units to use. We recommend a minimum of 3 units under each component, depending on weight.

The upper flange of the OREA’s are designed to provide a suction cup like effect and adhere to the underside of the component, while the lower flange adheres to the supporting surface. All the energy is managed within the core of the OREA’s, which are tuned to work within specific weight ranges. This results in greater sound clarity and a more open soundstage providing authentic, three-dimensional sound.

 

The existing feet on an audio component may connect well and fit nicely around the perimeter of the OREA isolator. Alternatively, you may get better performance by either removing the feet entirely or placing the OREA’s beside the existing feet to have them connect directly to the chassis or base of the component.

Weight Capacity

The weight capacity per OREA isolator is as follows:

  • OREA Graphite - 4 pounds (1.8 KG) per isolator
  • OREA Bronze - 8 pounds (3.6 KG) per isolator
  • OREA Indigo - 16 pounds (7.2 KG) per isolator
  • OREA Bordeaux - 32 pounds (14.4 KG) per isolator

The OREA’s are designed to be used in multiples to match the weight of the component or speaker. The total weight capacity is calculated as follows:

Total Weight Capacity = [Weight cap. per isolator] x [Qty of Isolators]

 

It is common to use 3 or 4 OREA isolators for each component or speaker, but keep in mind that it is most important to stay within the weight capacity of the OREA isolator.

The weight distribution of the component can also be taken into account. If for example the component is heaviest at the back, then it is common to use 3 isolators with 2 positioned at the back corners and 1 positioned front/center.

 

Nýlega skoðað

HiFi aukahlutir - Fleiri vörur

Nýtt

Grill - Muso II - Terracotta

Mu-so 2nd Generation’s speaker grille has had a style update. The standard black grille can be easily swapped for one of 3 new colour options – Olive, Terracotta and Peacock - to best suit your taste and décor.
Samtals m/vsk
11.990 kr.
Á lager

Music Nomad 6 'n 1 Next Level Vinyl Record Care Kit

Designed by our team in Sonoma, CA (USA). We didn't just go buy small off the shelf common designs that can be found in many other kits. We felt we had to design from scratch the ultimate cleaning tools Our 3 'n 1 design starts with a super soft synthetic dust brush (brown) to detail everything but the record and needle. Then use our directional, unique cleaning pad (black) that lifts and traps the dust off your record. The black pad doubles as your cleaning solution applicator to clean your record. After applying the cleaner, flip it around to use our special drying material (grey). The innovative ergonomic handle gives you unmatched control and comfort you will appreciate
Samtals m/vsk
3.190 kr.
Á lager

Focal pack 2 stands Theva/Vestia N1

Par af stöndum fyrir Focal Theva N°1 og Vestia N°1
Samtals m/vsk
37.990 kr.
Á lager

3/8-16 sett með fjórum f. GAIA1

Með GAIA 2 og GAIA3 hátalarafótunum fylgja 3 sett af skrúfum til að festa þá undir hátalara - 3 algengustu týpurnar. Ef engin þeirra passar þínum hátölurum þá eigum við til nokkrar týpur til.
Samtals m/vsk
3.590 kr.
Á lager