Fara í efni

Karfan þín

Karfan er tóm.

Spennar f. effekta

Síur

Framleiðendur
Vinsælt
Tónlistarnám
Tilboð (pakkatilboð)
Vaxtalaust lán
Gott fyrir byrjendur

MXR ISO-BRICK PRO Power Supply

The MXR Iso-Brick Pro Power Supply delivers clean, steady voltages to a diverse range of pedal types in a sleek form factor so that you can confidently power your entire board without any extra bulk.
Samtals m/vsk
39.990 kr.
Á lager

Cioks SOL Professional PSU

The Heart and SOL of Your Pedalboard SOL is the ultimate solution for bringing life to a small to medium-sized pedalboard setup, especially if you are using power-hungry pedals. SOL is the smallest mains-powered switch-mode power supply we make at CIOKS (no wall-warts here) and the no-frills design plus massive power will leave you free to focus on your creative spark. Featuring the same 660mA at 9V DC per outlet and four switchable voltages on each outlet as its bigger brother CIOKS DC7, SOL is the most powerful small form-factor power supply available today with a total of 30 watts of DC power available.
Samtals m/vsk
29.990 kr.
Á lager

CIOKS 8 (expander kit) Pro PSU

CIOKS 8 is our largest switch-mode power supply expander and it features 8 isolated outlets which each deliver 9V DC at 660mA. All outlets offer four selectable voltages (9, 12, 15 or 18V). CIOKS 8 was mainly designed to be used as a large extension to the DC7 power supply in case you need more outlets. If you want to use CIOKS 8 as an extension to the DC7, simply connect CIOKS 8 to the courtesy 24V outlet on your DC7 with the included 24V DC Link cable and you are good to go. If you are looking for a super powerful power supply setup to power a large pedalboard, the combination of CIOKS DC7 and CIOKS 8 will definitely be an awesome solution where this combo will give you 15 isolated outlets in total plus a 5V USB outlet to charge your smartphone or tablet.
Samtals m/vsk
29.990 kr.
Á lager

CIOKS 4 (expander kit) Pro PSU

The super flexible little member of the Future Power Generation! CIOKS 4 power supply is the perfect companion to CIOKS DC7 in case you would like four additional outlets with four selectable voltages on each tap (9, 12, 15 and 18V DC) which can each deliver 660mA at 9V DC. Simply connect CIOKS 4 to your CIOKS DC7 via its 24V outlet and you are good to go. But that is definitely not all – what makes CIOKS 4 truly unique is the fact that you can power it with anything from 9V to 24V DC or 9V to 12V AC via the non-polarized DC socket input. Furthermore CIOKS 4 can even be powered by connecting it to a USB powerbank via its 5V USB C input or by using a tablet or laptop power supply with a USB C plug. This flexibility means that you can use CIOKS 4 as a stand-alone unit and power it with almost any adapter including the 1-SPOT, GigRig Generator or your iPad charger.  It can also convert an unused AC outlet on your existing power supply into 4 isolated DC outlets. Features CIOKS 4 has the same groundbreaking 1-inch profile (25,4mm) as CIOKS DC7 Ultra-low noise achieved by multistage filtering 4 isolated DC-outlets, 6W each 660mA at 9V DC on each outlet 4 selectable voltages on each outlet 5V USB C Input for powering the unit with a powerbank or USB C adapter Non-polarized input DC socket which accepts anything from 9-24V DC or 9-12V AC Global overload status LED Total maximum output power 24W* Mounting hardware for Pedaltrain and Templeaudio boards included Compatible with CIOKS Mini GRIP for drill-free mounting on Pedaltrain boards 5 Flex cables included 24V link cable included Designed in Denmark, assembled in Poland   Specifications: Input 1: 5V DC (USB C socket) Input 2: 9-24V DC or 9-12V AC (non-polarized 5,5/2,1mm DC socket) Outlet 1-4: 9V DC / 660mA or 12V DC / 500mA or 15V DC / 400mA or 18V DC / 330mA each Output power: max. 24W in total* * Total output power of 24W can be achieved provided an appropriate and sufficient input power source is applied. For full output power please use a 24V DC source with min. 30W of power capability. Flex cables included: 2x 1030 – Type 1 - 5,5/2,1mm DC-plug, centre negative, L-shape, 30cm (black) 2x 1050 – Type 1 - 5,5/2,1mm DC-plug, centre negative, L-shape, 50cm (black) 1 x 1533 – 3-way daisy chain Flex type 1, 30+30+50cm (black) Total of five Flex cables, all BOSS standard, are included. The user is able to power 6 pedals with the included Flex kit. Commercial Specifications Product name CIOKS 4 (expander kit)*
Samtals m/vsk
22.990 kr.
Á lager

Cioks DC7 Professional PSU

DC7
Samtals m/vsk
40.990 kr.
Á lager

EB Volt Power Block

Don’t step onstage without the Ernie Ball Volt Power Supply. For musicians on the move, this ultra-compact, road-ready unit puts a complete powering solution in the palm of your hand. Connect all your favorite digital and analog pedals to multiple high current DC outputs for clean, regulated power. Relax and rely on thermally protected, short circuit-proof design with ultra-low noise operation. When the road calls, the Volt demands a place on your pedalboard.
Samtals m/vsk
25.990 kr.
Á lager

EBS AD9PRO 9v Power Supply

Samtals m/vsk
4.590 kr.
Á lager

MXR DC BRICK Power Supply

Samtals m/vsk
18.990 kr.
Á lager

EBS DC Adaptor Split 1-4 Angle

Samtals m/vsk
1.490 kr.
Á lager

TC PSU 12v for floor pedals

The TC-Helicon PowerPlug 12-Volt Power Supply for Nova Pedals & TC-Helicon DC Powered Devices is a 12-volt, 1000mA power supply intended for select TC Electronic and TC-Helicon brand devices. This power supply is designed to work with the TC Electronic Nova Pedals, and also works with TC-Helicon DC powered devices. 12 Volts DC, 1000mA. Works With TC-Helicon DC Powered Devices. Works With TC Electronic Nova Pedals. Includes International Plug Adapter.
Samtals m/vsk
7.990 kr.

Cioks DC10 Link Pro PSU

This is one state of the art professional power supply for effect pedals. It delivers 2.800mA of the cleanest power from its 10 isolated outlets with 9 and 12V available. Besides being one of the most powerful power supplies for effect pedals on the market it also offers some new advanced features. The adjustable outlet 10 will power pedals with non standard voltages like e.g. Tonebones at 15V, Blackstar dirt pedals at 22V, GLAB GSC-4 controller at 24V, all high current 18V pedals from Hiwatt, a few vintage EHX and many others. Due to its very high 800mA current capability at 9 or 12V you can with this single outlet power one of the big units like Line 6 M9, a VOX ToneLab or some older BOSS GT-XX Processors just to mention a few.
Samtals m/vsk
46.990 kr.

Cioks Ciokolate Pro PSU

CIOKS was founded in year 1991 and the first product out was the Baby power supply. It was released for sale in August 1992. To mark our 20th anniversary we’ve made one of most powerful and versatile power supplies for effect pedals on the market – CIOKS CIOKOLATE. With some additions and a slightly different design we’ve put the DC10 and AC10 power supplies in one box. Loads of power, almost endless compositions of different voltages and a great selection of included Flex cables make this power supply a really strong tool for powering big pedal boards with many different pedals. CIOKS CIOKOLATE power supply will power several high current digital pedals, high voltage 18, 24 or even 40V pedals, one or two AC pedals, one or two Radial Tonebone pedals or simulating a dying battery it will power your old favourite fuzz or overdrive. On top of all that it will of course also power all your standard 9V pedals from its many isolated outlets.
Samtals m/vsk
58.990 kr.

Cioks 4 Adapter kit Pro PSU

CIOKS 4 is the perfect companion for CIOKS DC7 in case you would like four additional outlets with four selectable voltages (9, 12, 15 and 18V DC) which can each deliver 660mA at 9V DC.
Samtals m/vsk
27.990 kr.