Fara í efni
Endurheimta lykilorð Nýskráning

Karfan þín

Karfan er tóm.
VNR.: FISCHER001124

Fischer Amp In Ear Amp 8-Set

Samtals m/vsk
195.908 kr.

The perfect solution to provide up to eight musicians with an in-ear mix.

The half rack-space In Ear Amp 8 with eight XLR outputs is based on the Fischer Amps In Ear Amp 2. Musicians can control their volume individually with Fischer Amps Mini Body Packs with XLR input [HA00001125]. The In Ear Amp 8 allows short cable routes on stage and cabling with standard microphone cables. Thanks to the Class A MOSFET amplifier with switchable output power, the unit can be used with high-impedance headphones as well as with low-impedance in-ear earphones. The XLR inputs have parallel XLR outputs so that the signals can be looped-through to the next In Ear Amp.

Using the In Ear Amp 8 is a simple but effective way to provide a stereo mix for a great number of listeners - the optimum system for orchestras, studios, conference rooms and budget-conscious productions.

Framleiðandi fischeramps
Samtals m/vsk
195.908 kr.

Nánari lýsing

  • Two balanced inputs with combined XLR/jack connector with link-through input (XLR-outputs)
  • LED display for input signals
  • Brand new class A MOSFET headphone amp with limiter
  • Switchable output power for low-impedance in-ear earphones and headphones with impedance > 250 ohms
  • Sturdy 9.5“ casing with integrated switching power supply, switchable voltage supply 115VAC or 250VAC
  • Ground-lift switch
  • Adaptor set to mount In Ear Amp 8 in 19“ rack

 

Dimensions: L x W x H: 220 x 190 x 43 mm
Weight: 2.0 kg
Operating Voltage: 115V AC or 230V AC 50/60 Hz, switchable
Power Consumption: 18 W max.
Mains Connection: Euro power connector, 3-pole with gnd
Frequency Response: 20 Hz to 50 kHz +/- 1 dB
 
Power Headphone Amp (low level): max. 190mW, minimum impedance 12 ohms
max. 1.2 V RMS, 0.0026% THD at 1 kHz
 
Power Headphone Amp (high level): max. 400mW, minimum impedance 40 ohms
max. 4 V RMS, 0.0025% THD at 1 kHz
 
Limiter in Headphone Amp: yes (cannot be disabled, internal level +4 dB)
Input Connectors: 2 x combined XLR/jack, balanced, 0 dB input level
Outputs: 2 x XLR Link out
Headphone Outputs: 8 XLR male for XLR microphone cable or Guitar In Ear Cable
 
Developed and manufactured in Germany

Nýlega skoðað

Fylgihlutir hljóðkerfa - Fleiri vörur

Nýtt

Poki f. iLoud Micro Monitor Pro

Gig bag for iLoud Micro Monitor Pro with adjustable straps and zippered accessory pouch. Accommodates 2 monitors. Color: Black.
Samtals m/vsk
8.990 kr.
Á lager
Nýtt

Ecler HDMI yfir CAT6 extender

VEO-XPT24 is a professional HDBaseT transmitter/receiver kit for HDMI extension up to 70 meters over category cable. It supports video signal at resolution up to 4K/UHD with embedded multi-channel audio formats like DTS-HD Master Audio and Dolby TrueHD. The extender kit includes bi-directional IR and RS-232 pass-through. VEO-XPT24 is the ideal solution for commercial point-to-point applications that require extension over greater distances than HDMI can support. 
Samtals m/vsk
49.990 kr.
Á lager
Nýtt

Ecler HDMI video switcher 4x1

VEO-SWH44 is a 4x1 HDMI® switcher for high dynamic range (HDR) formats. It is the ideal solution for applications requiring 4K/UHD and HDR sources and displays. VEO-SWH44 includes audio de-embedding features and audio EDID management. The HDMI® selection could be automatic (sense selection) and manual (frontal panel, remote control or serial commands). The controls include ARC mute and LED indications of the selected sources and settings.  
Samtals m/vsk
37.990 kr.
Á lager
Nýtt

Ecler HDMI video splitter 1>4

VEO-SPH44 is a 1×4 HDMI® splitter for high dynamic range (HDR) formats. Simultaneously displays an UItra Hi-Definition source on up to two UItra HD displays.  
Samtals m/vsk
21.990 kr.
Á lager