Fara í efni

Karfan þín

Karfan er tóm.

VNR.: KE-ZOMA

Keeley Electronics ZOMA Stereo Reverb & Tremolo

Samtals m/vsk
59.990 kr.

Our most High Fidelity pedal to date

Intuitive Control Layout and Easy Access to Alternate Controls

Instant Effect Order Switching

True Bypass or Buffered Trails

Framleiðandi audiodistribution
Samtals m/vsk
59.990 kr.

Nánari lýsing

ZOMA Stereo Reverb and Tremolo

Meet the ZOMA Stereo Reverb and Tremolo – Our most high-fidelity pro Reverb and Tremolo ever!

ZOMA Stereo Reverb and Tremolo

ZOMA Stereo Reverb and Tremolo

Begins shipping 7-10 days from purchase date.

Incredible stereo reverb and tremolo with the Zoma

The first sound effects built into amplifiers were tremolo and reverb. Keeley’s legendary reverbs are paired with their sultry, vocal-like tremolos to give you an unreal sonic experience.

Zoma Key Features

  • Simple Control Layout: Three large knobs give you maximum control over Reverb Level and Rate and Depth for Tremolo.
  • Easy Access Alt-Controls: Reverb Decay, Reverb Tone, Tremolo Volume.
  • Instant Effect Order Switching: Choose which signal path is right for you. Put your tremolos after the reverb for a vintage correct, black-panel tone. Experience a dirty, swampy tone with harmonic tremolo on top of reverb.
  • True Bypass or Buffered Trails: You chose what sounds and works best in your rig.

The Zoma is more than just a pedal – it’s your signature. Reverb and tremolo effects crown any player’s pedalboard. Trust Keeley reverbs for an inspiring “always-on” sound.

Three Reverb and Trem Modes:

We’ve combined the most popular ‘Verbs and Trems into three different pairs. There’s nothing quite like the syrupy smooth sound of our Plate Reverb combined with Harmonic Tremolo.

  • SS – Spring Reverb and Sine Tremolo – Classic black panel amplifiers had spring reverb followed by a sine wave tremolo (at the power tubes)
  • PH – Plate Reverb and Harmonic Tremolo – Smooth reverb with swampy harmonic trem, what’s not to love?
  • PV – Plate Reverb and Pitch Vibrato – Vocal smooth vibrato with other-worldly reverb.

Reverb – Sounds and Controls

  • Spring Reverb: tube amp spring reverb – we simulate every detail of that classic vintage reverb sound.
  • Plate Reverb: bright, smooth reverb from a thin vibrating metal plate.
  • Reverb Decay: (Alt feature) Hold REVERB/ALT SWITCH down while adjusting Level knob.
  • Reverb Tone: (Alt feature) Hold REVERB/ALT SWITCH down while adjusting Rate knob.

Tremolo – Sounds and Controls

  • Sine Wave or Volume Tremolo: Sine wave tremolo simply adjusts the volume of the signal up and down.
  • Harmonic Tremolo: Just like tube-amp harmonic tremolo, your guitar signal is phase-split and filtered, almost like a phaser.
  • Pitch Vibrato: Bends the notes out of tune, you control how far and how fast.
  • Alt-Control-Tremolo Boost Volume: Hold REVERB/ALT footswitch down while adjusting Depth knob.

Stunning Design and Ease of Use

  • Artful Electronic Circuitry: Housed in a proprietary angled aluminum enclosure for simplicity and durability.
  • We stand behind EVERY Keeley pedal: Proudly Designed and Manufactured in the USA.

 

Upgrade Your Sound

Explore new sonic possibilities with the Zoma Reverb and Tremolo pedal. Prepare yourself for stereo, high-fidelity reverbs and luxurious tremolos.

 

 

Zoma Highlights

  • Reverb: Experience the ultimate reverb with the Keeley ZOMA, featuring two immersive modes: the lush, vintage-inspired Spring Reverb and the rich, expansive Plate Reverb—delivering true stereo sound that transforms your tone with precision and depth.
  • Tremolo: Immerse yourself in the rich textures of the Keeley ZOMA’s three distinct tremolo modes: classic Sine Wave Tremolo, vibrant Harmonic Tremolo, and dynamic Pitch Vibrato—crafted for true stereo sound and unmatched tonal versatility.

 

 
ZOMA Stereo Reverb and Tremolo

The Keeley Electronics ZOMA features true-stereo in and out.

 

ZOMA Specifications

  • Pedal Type: Reverb and Tremolo
  • Analog/Digital: 100% Analog dry signal – Digital Reverb
  • Effects: Spring and Plate reverbs, Sine, Pitch, and Harmonic Tremolos
  • Inputs/Outputs: TS 1⁄4” jacks
  • Bypass: True Bypass or Silent Buffered Bypass, user selectable
  • Power Requirements: 9-18 VDC, 150mA (high current power supply sold separately) – No battery

 

Pedal Dimensions:

  • Width – 3.9in / 99mm
  • Height – 2.6in / 66mm
  • Depth – 4.9in / 124.5mm

 

Unlock new dimensions of sound with the Zoma Reverb and Tremolo pedal!

Nýlega skoðað

Effekta pedalar - Fleiri vörur

Nýtt

Fender Santa Ana Overdrive V2

Santa Ana V2 is a JFET-based class-A overdrive pedal running at 18V internally — a design that provides the touch sensitivity and high-headroom drive that players expect from a Fender tube amp pushed hard and then some. At its heart, this dual-voice drive circuit sports three straightforward controls and a Voice switch to push your guitar from natural-sounding tight overdrive (voice A) to smooth, thick lead tones (voice B). The Drive and Tone controls provide a wide range to dial in just the right flavor of gain and treble presence in the drive signal, while the rear-mounted Tight switch pulls some pre-drive bass frequencies out for an even more focused feeling drive. To further sculpt the frequency response of your drive, a standalone, independently switchable 3-band EQ circuit is built around the Santa Ana V2 drive engine. Active Bass, Middle, and Treble controls offer a wide range of adjustment, cutting or boosting each frequency range with a center detent to mark flat response. Determine exactly how the EQ circuit interacts by using the EQ Placement switch to stack the EQ before or after the drive: Pre-drive EQ flavors the overdrive’s response by determining which frequencies are clipped most by the drive circuit; post-drive EQ lets your guitar hit the drive head on and shapes the resulting gain tones for a more dramatic EQ effect. With a fine-tuned JFET drive engine, independent EQ circuit, conveniently switchable buffered and true bypass modes, and multiswitch enabled footswitches for momentary and latching activation, the Santa Ana V2 is an ultra-flexible, intuitive overdrive with tons of tones on tap.
Samtals m/vsk
29.990 kr.
Á lager
Nýtt

Fender Pugilist Distortion V2

The Pugilist V2 is a distortion pedal like no other, wielding dual independent distortion engines packed inside one chassis to crank out a wealth of thick tones. Each distortion engine can be turned on separately using its designated footswitch and dialed in using its own Gain, Tone and Level controls. This provides two distinctively flavored distortion voices, with Engine A delivering treble-rich lead drive tones and Engine B laying on thick, heavier distortion. The real magic of Pugilist V2 is in the Path switch, which runs the two distortion engines through three different signal paths as they push each other into harmonically rich saturation. The two Series Modes send one circuit into the other for stacking drive tones that can be layered like amp channels, using the footswitches to kick into the next level of cascading distortion. Parallel Mode delivers deep tone-shaping by running the two engines side by side to be blended and balanced using the level controls to create the perfect meld of articulate, chunky distortion. Featuring global Mid Cut and Bass Boost switches, conveniently switchable buffered and true bypass modes, and multiswitch enabled footswitches for momentary and latching activation, these ever-sparring distortion circuits knock out huge distortion tones with modern conveniences fit for any board.
Samtals m/vsk
29.990 kr.
Á lager
Nýtt

Fender Pelt Fuzz V2

The Pelt V2 is a pro-level fuzz pedal with a classic spirit. Built around silicon transistors and a buffer-friendly input stage, it packs all the fuzzed-out tones a saturation-lover could ask for — from full, biting octave fuzz to smooth, harmonically rich walls of gain. Beyond traditional Fuzz, Tone and Level controls, the Pelt V2 takes saturation shaping to the next level with Sag and Bloom controls to fine tune exactly how your signal breaks and splatters into furry, gain-ladened madness. Use the Mids and Thick switches to deliver extra EQ shaping for mid and bass frequency presence to instantly push into new characters of fuzz. The Octave (Chaos) footswitch takes this fuzz into all-new territory by adding a traditional octave-up effect or, with Chaos engaged, an asymmetrical octave effect for glitchy, sputtering artifacts and unpredictable tonal chaos. To top it off, this buffer and bass friendly pedal features a Blend control that enables mixing of fuzz and clean tones (perfect for bass) or blending fuzz with the drive tone of pedals before it in your signal chain. Featuring conveniently switchable buffered and true bypass modes, multiswitch enabled footswitches for momentary and latching activation, and a world of tone-shaping tools for dialing in the exact fuzz you’re after, the Pelt V2 is the ultimate way to add a gloriously wooly coat to your tone.
Samtals m/vsk
29.990 kr.
Á lager
Nýtt

Fender Bends Compressor V2

An intuitive compressor/boost combo offering low-noise compression in both modern and vintage tube flavors, the Bends V2 is ideal for guitar and bass alike. Utilizing a unique take on OTA technology for real-time gain control, this compressor reacts to your playing dynamics smoothly and naturally to balance the volume of louder and quieter sections while adding sustain and thickness to your notes. The Bends V2 simplifies compression to three clearly labeled controls — a three-speed Attack switch, a fine-tuned Release control, and an Input control which sets the input level of the compression trigger. An active Tone control with a center detent cuts or boost treble to make up for any lost sparkle, and the Blend control injects clean into the mix to provide the perfect balance of clean dynamics and compression. A rear-mounted Vintage switch provides the real secret sauce, reshaping the circuit from a crisp, surgical action to a beautifully colored smooth compression with a hint of natural saturation when engaged. Combine boost and compression for some real magic. The Comp Pre/Post switch rearranges the internal circuit to reorder the independent ultra-clean boost and compression. Place the boost before compression for soaring Nashville-style sustain or stack the boost after your signal is compressed and kick it on for a solo boost to increase the overall output level into your next effects. Featuring an independent boost circuit, switchable buffered and true bypass modes, and multiswitch enabled footswitches for momentary and latching activation, the Bends V2 is a fully featured compressor that brings natural feeling dynamic control to any instrument.
Samtals m/vsk
29.990 kr.
Á lager