Fara í efni

Karfan þín

Karfan er tóm.

VNR.: KE-MAG

Keeley Magnetic Echo Delay

Samtals m/vsk
32.990 kr.

Keeley Magnetic Echo – The Mag-Echo pedal simulates tube tape echo sounds by using the delay circuit and a little bit of modulation.  Tape echos have long been regarded as a warm and very guitar friendly form of delay.  The Mag-Echo achieves similar results by using a touch of Lo-Fi delay, a slightly filtered echo response to keep things warm, and some modulation.  Modulation, or “Wow and Flutter” in the tape world is a slight pitch shift or wavering that occurs as the tape is pulled across the heads.  The modulation we use is similar to what we use in our Seafoam Chorus, a slight wavering of pitch on the trails of the repeats.  With a simple set of controls for the delay – Time, Regen, and Level and with the “Wow and Flutter” controls – Depth and Rate you can create some very vintage or rather unique tones.

Framleiðandi audiodistribution
Samtals m/vsk
32.990 kr.

Nánari lýsing

ECHO CONTROLS

Delay Time – This Time control roughly sets the length between your repeats between 40ms and 600ms.  This range is well suited for classic, vintage delay sounds that are great for slap-back or medium length delay times.

Regen – This control sets the number of repeats.  You can set this for a single slap back echo or turn it up for a runaway, self-oscillating or self-regenerating echoes.  (Now go back and twist the Time control for some crazy sounds!)

Delay Level – The Level control is your mix, how loud you want to hear the echoes.

WOW AND FLUTTER CONTROLS

Depth – Turn this control to achieve deeper and deeper  chorusing and pitch shifting on your echoes.  As you raise the control the Depth and Rate LED will start to glow giving you a visual indication as to the amount of modulation you are applying to the repeats.

Rate – This is your Flutter control.  It’s another way to control how poorly your tape echo is performing!  Not that any tape deck was every in this bad of condition, but it sure sounds good to have a little pitch modulation on your echo!  Using these controls gives you a nice way to create unique and very musical delays.

Whether you’re into Rockabilly slap-back echoes, experimental sounds, or just want a great classic rock sounding echo, the Magnetic Echo will sound great in your rig.

Keeley Electronics started to develop and produce this delay way back in 2005.  But as things happened, we worked on other projects, always keeping an eye on the growing delay and echo market.  We sure you will be very happy with the tone of this echo/delay/modulation effect.

It’s pretty clear from this unbiased shoot-out that the Magnetic Echo wins.  The delays sound more like the original and not as filtered and cut off.  The modulation is more sophisticated.  Price point is the same! 

Nýlega skoðað

Effekta pedalar - Fleiri vörur

Nýtt

UDG Creator Sheeran Looper X Hardcase Black

Samtals m/vsk
7.590 kr.
Á lager
Nýtt

Fender Santa Ana Overdrive V2

Santa Ana V2 is a JFET-based class-A overdrive pedal running at 18V internally — a design that provides the touch sensitivity and high-headroom drive that players expect from a Fender tube amp pushed hard and then some. At its heart, this dual-voice drive circuit sports three straightforward controls and a Voice switch to push your guitar from natural-sounding tight overdrive (voice A) to smooth, thick lead tones (voice B). The Drive and Tone controls provide a wide range to dial in just the right flavor of gain and treble presence in the drive signal, while the rear-mounted Tight switch pulls some pre-drive bass frequencies out for an even more focused feeling drive. To further sculpt the frequency response of your drive, a standalone, independently switchable 3-band EQ circuit is built around the Santa Ana V2 drive engine. Active Bass, Middle, and Treble controls offer a wide range of adjustment, cutting or boosting each frequency range with a center detent to mark flat response. Determine exactly how the EQ circuit interacts by using the EQ Placement switch to stack the EQ before or after the drive: Pre-drive EQ flavors the overdrive’s response by determining which frequencies are clipped most by the drive circuit; post-drive EQ lets your guitar hit the drive head on and shapes the resulting gain tones for a more dramatic EQ effect. With a fine-tuned JFET drive engine, independent EQ circuit, conveniently switchable buffered and true bypass modes, and multiswitch enabled footswitches for momentary and latching activation, the Santa Ana V2 is an ultra-flexible, intuitive overdrive with tons of tones on tap.
Samtals m/vsk
29.990 kr.
Á lager
Nýtt

Fender Pugilist Distortion V2

The Pugilist V2 is a distortion pedal like no other, wielding dual independent distortion engines packed inside one chassis to crank out a wealth of thick tones. Each distortion engine can be turned on separately using its designated footswitch and dialed in using its own Gain, Tone and Level controls. This provides two distinctively flavored distortion voices, with Engine A delivering treble-rich lead drive tones and Engine B laying on thick, heavier distortion. The real magic of Pugilist V2 is in the Path switch, which runs the two distortion engines through three different signal paths as they push each other into harmonically rich saturation. The two Series Modes send one circuit into the other for stacking drive tones that can be layered like amp channels, using the footswitches to kick into the next level of cascading distortion. Parallel Mode delivers deep tone-shaping by running the two engines side by side to be blended and balanced using the level controls to create the perfect meld of articulate, chunky distortion. Featuring global Mid Cut and Bass Boost switches, conveniently switchable buffered and true bypass modes, and multiswitch enabled footswitches for momentary and latching activation, these ever-sparring distortion circuits knock out huge distortion tones with modern conveniences fit for any board.
Samtals m/vsk
29.990 kr.
Á lager
Nýtt

Fender Pelt Fuzz V2

The Pelt V2 is a pro-level fuzz pedal with a classic spirit. Built around silicon transistors and a buffer-friendly input stage, it packs all the fuzzed-out tones a saturation-lover could ask for — from full, biting octave fuzz to smooth, harmonically rich walls of gain. Beyond traditional Fuzz, Tone and Level controls, the Pelt V2 takes saturation shaping to the next level with Sag and Bloom controls to fine tune exactly how your signal breaks and splatters into furry, gain-ladened madness. Use the Mids and Thick switches to deliver extra EQ shaping for mid and bass frequency presence to instantly push into new characters of fuzz. The Octave (Chaos) footswitch takes this fuzz into all-new territory by adding a traditional octave-up effect or, with Chaos engaged, an asymmetrical octave effect for glitchy, sputtering artifacts and unpredictable tonal chaos. To top it off, this buffer and bass friendly pedal features a Blend control that enables mixing of fuzz and clean tones (perfect for bass) or blending fuzz with the drive tone of pedals before it in your signal chain. Featuring conveniently switchable buffered and true bypass modes, multiswitch enabled footswitches for momentary and latching activation, and a world of tone-shaping tools for dialing in the exact fuzz you’re after, the Pelt V2 is the ultimate way to add a gloriously wooly coat to your tone.
Samtals m/vsk
29.990 kr.
Á lager