Fara í efni

Karfan þín

Karfan er tóm.

VNR.: OBN-EXRAMP

OBN Endeavors Expr Ramper

Samtals m/vsk
11.990 kr.

Expression Ramper allows you to pick two expression settings and move between them, either in one motion or as a continuous LFO activated by a footswitch. The mini enclosure size takes up minimal space while creating new sounds out of any pedal with an expression input.

Framleiðandi audiodistribution
Samtals m/vsk
11.990 kr.

Nánari lýsing

Expression Ramper features:

  • Triangle, square, and one-shot shapes for movement between A and B expression settings

  • Rate control to set the speed of movement

  • Footswitch activated motion to create modulated effects on the fly or ramp between two presets

  • Configurable output for TRS, TRS reverse polarity, or TS expression inputs

  • LED to indicate which setting is currently active

  • Requires 9VDC center negative power

NOTE: Expression Ramper is initially configured for TRS active at Tip for compatibility with Old Blood devices, but can be configured for TRS active at Tip, TRS active at Ring, and TS using the internal jumpers. By default, it ships with a 50K digital potentiometer. This potentiometer is socketed and can be replaced with 10K and 100K values if needed (part code MCP41010-I/P and part code MCP41100-I/P respectively).

Nýlega skoðað

Effekta pedalar - Fleiri vörur

Nýtt

KMA Machines DUAL LOOP SWITCHER

We get it. There’s a wealth of pedalboard switching devices on the market and some can be quite complex, but what if you want to keep switching between multiple pedals on your board simple, easy to use and yet still effective? Well, the KMA Machines DUAL LOOP SWITCHER pedal has you covered and has been created with a focus on durability, reliability, simplicity and hassle-free operation to expand your creativity. Whether you’re looking to simply switch between two single pedals without extended tap dancing or combine and switch between two entirely separate signal chains, this helpful utility device features KMA’s active circuitry and soft switching for maximum signal integrity without compromise. Plus, with full Stereo/Dual Mono operation the DUAL LOOP SWITCHER allows for maximum flexibility.
Samtals m/vsk
23.990 kr.
Á lager
Nýtt

KMA Machines Active Stereo ABY

There’s nothing new about ABY boxes. They’re a very commonly used accessory and a staple part of many setups out there. But if they are so common, then (until we launched our passive Stereo ABY) why was it so difficult to find one in a stereo format that’s well built, noise-free AND affordable? This is a question we kept encountering as we use many stereo devices daily here at KMA, plus we know that a lot of users are just as mesmerised by the wide sonic worlds of stereo as we are. So, we made a killer stereo ABY switcher to use here at our workshop. In the process we found it so useful, so we decided to make the original STEREO ABY available to the world too in a pedal format. However, despite our passive boxes gracing thousands of rigs the world over, the Active STEREO ABY takes things a little further and is ideal for those who like to use the Y splitting or combining functions – at least with some signals that don’t always play nicely together, due to often differing impedances between connected devices. With KMA’s high quality active buffer, the pedal can also help eliminate level mismatches or even signal loss, if used with long cable runs. Whether you’re looking to switch or combine a Stereo input signal between two separate destinations or switch or combine two separate Stereo input signals into a single stereo output without signal loss, the KMA Machines STEREO ABY pedal is a dependable little helper for your tonal quest – the fate of your Stereo signals is in your hands!
Samtals m/vsk
23.990 kr.
Á lager
Nýtt

KMA Machines Active ABY

ABY boxes are not something that will set the world on fire. We know that. But what a good ABY box can do, is start a flame that’ll fully ignite your creativity, and our Active ABY pedal is a REALLY GOOD one. Expertly built, noise-free, gorgeous looks AND affordable – it just ticks all the boxes. As an additional offering to our Passive ABY box that has graced thousands of rigs the world over, the Active ABY is ideal for those who like to use the Y splitting or combining functions – at least with some signals that don’t always play nicely together, due to often differing impedances between connected devices. With KMA’s high quality active buffer, the pedal can also help with level mismatches or signal loss due to long cable runs. Whether you’re looking to switch or combine your Mono input signal using two separate outputs, switch or combine two separate input signals into one output, the Active ABY pedal is a dependable little helper for your tonal quest – the fate of your signal is in your hands!
Samtals m/vsk
15.990 kr.
Á lager
Nýtt

Keeley Electronics ZOMA Stereo Reverb & Tremolo

Our most High Fidelity pedal to date Intuitive Control Layout and Easy Access to Alternate Controls Instant Effect Order Switching True Bypass or Buffered Trails
Samtals m/vsk
59.990 kr.
Á lager