Fara í efni
Endurheimta lykilorð Nýskráning

Karfan þín

Karfan er tóm.
VNR.: OEX-0027-00

Origin Effects M-EQ Driver

Samtals m/vsk
49.990 kr.

The M-EQ DRIVER is a Mid Booster & Drive pedal, based on a vintage Pultec® studio EQ. Still sought after today, these legendary passive EQs from the 1950s can be heard on thousands of hit records thanks to their highly musical, versatile EQ curves and the ability to overdrive their push-pull output stage. Rather than making an exact replica, we have chosen to reimagine this classic piece of studio gear as a guitar-oriented, compact pedal.

Craft the perfect mid boost, add some studio-inspired saturation or push the pedal’s valve-like output stage into fierce “cocked wah” distortion. With the addition of our Adaptive Circuitry, the M-EQ DRIVER is always responsive and precise, with a character all of its own.

Framleiðandi origineffects
Samtals m/vsk
49.990 kr.

Nánari lýsing

FEATURES LIST:

  • Based on the legendary Pultec® studio EQs of the 1950s
  • Choice of mid boost frequencies
  • Adaptive Cut control responds to volume changes and playing dynamics
  • Transformer-equipped circuitry
  • Valve-like push-pull output stage
  • Ultra-high input impedance
  • High-quality buffered bypass
  • Premium components throughout
  • Designed and built in England

 

THE DETAILS:

The original Pultec® studio EQs are renowned for having some of the most natural and musical EQ curves in existence, so we recreated the behaviour of this timeless, passive EQ and optimised it for electric guitar. To make sure you’re emphasising just the right part of your signal, the M-EQ DRIVER lets you choose between 0.8, 1.0 and 1.3 KCS mid boost frequencies (yes, we even kept the old “Kilocycles Per Second” label – Kilohertz in the present day).

Not only does this versatile mid boost guarantee compatibility with all kinds of guitars but, when pushed harder, can elicit a range of saturation from a classic “mid-hump” overdrive to ferocious, resonant distortion tones. Equipped with a transformer, this carefully developed circuit adds harmonic richness, while faithfully recreating the sonic footprint of an original vintage Pultec®.

Using the MID knob in conjunction with the DRIVE control lets you balance mid boost with overdrive, giving your clean or overdriven tones as much or as little mid-emphasis as you need.

To add something new to this classic design, we have equipped the M-EQ DRIVER with our Adaptive Circuitry, applied to the CUT control. Based on the High Frequency Attenuation band of a Pultec®, the CUT control progressively removes treble as it is increased. With the ADAPT switch engaged, this high-end roll-off is reduced as the pedal cleans up, allowing for a smooth transition from warm overdrive to bright clean tones by adjusting your guitar’s volume knob or playing dynamics.

 
 

SPECIFICATIONS

Physical

 
Weight

500 g (18oz)

 
Dimensions

124 × 58 × 64 mm (4.8 x 2.5 x 2.3 in.)

L x W x H - Includes knobs and switches

Electrical

 
Input Impedance

1 MΩ

 
Output Impedance

1 kΩ

 
Current Draw

80 mA

Power

 
Power Supply

9V DC 2.1 mm centre-negative

Please note: the M-EQ Driver is powered by a mains adaptor only (not included). We’ve dispensed with the usual 9V battery option, both to save space and to allow us to adopt a high-current approach, yielding lower noise levels and superior tone. Origin Effects pedals are designed to deliver impeccable performance using a range of power supplies.

We recommend you only use a regulated power supply specifically designed for guitar pedal applications as power supplies which do not have sufficient internal filtering can result in unwanted noise.

Nýlega skoðað

Effekta pedalar - Fleiri vörur

Nýtt

KMA Machines DUAL LOOP SWITCHER

We get it. There’s a wealth of pedalboard switching devices on the market and some can be quite complex, but what if you want to keep switching between multiple pedals on your board simple, easy to use and yet still effective? Well, the KMA Machines DUAL LOOP SWITCHER pedal has you covered and has been created with a focus on durability, reliability, simplicity and hassle-free operation to expand your creativity. Whether you’re looking to simply switch between two single pedals without extended tap dancing or combine and switch between two entirely separate signal chains, this helpful utility device features KMA’s active circuitry and soft switching for maximum signal integrity without compromise. Plus, with full Stereo/Dual Mono operation the DUAL LOOP SWITCHER allows for maximum flexibility.
Samtals m/vsk
23.990 kr.
Á lager
Nýtt

KMA Machines Active Stereo ABY

There’s nothing new about ABY boxes. They’re a very commonly used accessory and a staple part of many setups out there. But if they are so common, then (until we launched our passive Stereo ABY) why was it so difficult to find one in a stereo format that’s well built, noise-free AND affordable? This is a question we kept encountering as we use many stereo devices daily here at KMA, plus we know that a lot of users are just as mesmerised by the wide sonic worlds of stereo as we are. So, we made a killer stereo ABY switcher to use here at our workshop. In the process we found it so useful, so we decided to make the original STEREO ABY available to the world too in a pedal format. However, despite our passive boxes gracing thousands of rigs the world over, the Active STEREO ABY takes things a little further and is ideal for those who like to use the Y splitting or combining functions – at least with some signals that don’t always play nicely together, due to often differing impedances between connected devices. With KMA’s high quality active buffer, the pedal can also help eliminate level mismatches or even signal loss, if used with long cable runs. Whether you’re looking to switch or combine a Stereo input signal between two separate destinations or switch or combine two separate Stereo input signals into a single stereo output without signal loss, the KMA Machines STEREO ABY pedal is a dependable little helper for your tonal quest – the fate of your Stereo signals is in your hands!
Samtals m/vsk
23.990 kr.
Á lager
Nýtt

KMA Machines Active ABY

ABY boxes are not something that will set the world on fire. We know that. But what a good ABY box can do, is start a flame that’ll fully ignite your creativity, and our Active ABY pedal is a REALLY GOOD one. Expertly built, noise-free, gorgeous looks AND affordable – it just ticks all the boxes. As an additional offering to our Passive ABY box that has graced thousands of rigs the world over, the Active ABY is ideal for those who like to use the Y splitting or combining functions – at least with some signals that don’t always play nicely together, due to often differing impedances between connected devices. With KMA’s high quality active buffer, the pedal can also help with level mismatches or signal loss due to long cable runs. Whether you’re looking to switch or combine your Mono input signal using two separate outputs, switch or combine two separate input signals into one output, the Active ABY pedal is a dependable little helper for your tonal quest – the fate of your signal is in your hands!
Samtals m/vsk
15.990 kr.
Á lager
Nýtt

Nobels MOD-mini

Get ready to dial up the vibe with the MOD-mini, a compact powerhouse packed with lush modulation effects! Crafted to create epic sounds, this diminutive pedal delivers a kaleidoscope of tones with a wide stereo spread. From the pulsating tremolo of the swinging ‚60s to the funky phaser and U-Vibe grooves of the ‚70s, MOD-mini takes you into asonic time warp.Tap Tempo Magic: Crank up the creativity with extended speed ranges and watch the LED dance to your rhythm. Your Sound, Your Way: Flip between true or buffered bypasswith a slick toggle switch for ultimate flexibility.Big Vibes, Small Price: Classic modulation tones meet wallet-friendly affordability.The MOD-mini isn’t just a pedal—it’s your ticket to a retroinspiredsonic adventure!
Samtals m/vsk
16.990 kr.
Á lager